Accessories

[PN: 101-0299] Link ECU Wi-Fi Antenna Glass Mount 3m Cable

Used to increase Wi-Fi signal strength. Glass Mount. 3m Cable. Compatible with G5 Voodoo Pro.

[PN: 101-0293] Link ECU Pin Kit E (TKE)

Plug and Pin Kit only, E Plug. Includes: 1 x 26 position Superseal Connector Housing "E Plug" 26 x Superseal Terminals Gold Contact Finish “Pins”   Suitable for: G5 Voodoo Pro (26 pin E Connector)

[PN: 101-0289] Link ECU USCar Injector Connector Kit

USCar Fuel Injector Connector KitIncludes: Housing Crimp terminals Terminal seals Seal locating tab Locking tab

[PN: 101-0287] Link ECU Bosch Junior Timer/Jetronic (Male) to USCar (Female) Adapter

Bosch Junior Timer / Jetronic (Male) to USCar (Female) Adapter Commonly used when upgrading to fuel injectors with the newer USCar connector and your wiring loom has Bosch Junior Timer/Jetronic/EV1 connectors.

[PN: 101-0286] Link ECU Deutsch DTM12 Connector Kit

Includes housings, wedgelocks and pins. 7.5A

[PN: 101-0285] Link ECU Deutsch DTM8 Connector Kit

Includes housings, wedgelocks and pins. 7.5A

[PN: 101-0284] Link ECU Deutsch DTM6 Connector Kit

Includes housings, wedgelocks and pins. 7.5A

[PN: 101-0282] Link ECU Deutsch DTM3 Connector Kit

Includes housings, wedgelocks and pins. 7.5A

[PN: 101-0281] Link ECU Deutsch DTM2 Connector Kit

Includes housings, wedgelocks and pins. 7.5A

[PN:101-0195] Link ECU WB Loom for MR2 ST185 PlugIn

[PN: 101-0146-8Bundle] Link ECU 8 x Exhaust Gas Temperature Probe Bundle (EGTs)

DETAILS: Extreme Duty Fast Response EGT Temperature Probe.  Bundle includes 8 x Probes.  Type K thermocouple probe Exposed sensing junction for fastest response Includes 316 SS adjustable compression fitting Stainless steel protected...

[PN: 101-0146-6Bundle] Link ECU 6 x Exhaust Gas Temperature Probe Bundle (EGTs)

DETAILS: Extreme Duty Fast Response EGT Temperature Probe.  Bundle includes 6 x Probes.  Type K thermocouple probe Exposed sensing junction for fastest response Includes 316 SS adjustable compression fitting Stainless steel protected...

[PN: 101-0146-4Bundle] Link ECU 4 x Exhaust Gas Temperature Probe Bundle (EGTs)

DETAILS: Extreme Duty Fast Response EGT Temperature Probe.  This bundle includes four EGTs.  Type K thermocouple probe Exposed sensing junction for fastest response Includes 316 SS adjustable compression fitting Stainless steel protected...

[PN: 101-0124] Link ECU BG4 - 100 pack blanking plugs

Blanking plugs for unused terminal positions - 100 pack. Suits A, B, C and D G4, G4+ and G4X ECU connectors.

[PN: 101-0122] Link ECU G4 - 20 pack of terminals

Terminals - 20 pack. Suits A, B, C and D G4, G4+ and G4X ECU connectors.

[PN: 101-0092] Link ECU Housing & Terminals (TK G1 LEM)

To suit G1 models. 17 way housing and terminals

[PN: 101-0018] Link ECU BG4 - 10 pack blanking plugs

Blanking plugs for unused terminal positions - 10 pack. Suits A, B, C and D G4, G4+ and G4X ECU connectors.

[PN: 214-9800B] Link ECU GTRLink - NGTRX Bundle

DETAILS: The perfect package to upgrade your Nissan GTR. The G4X NGTRX ECU is a direct replacement for your factory ECU. Combined with the XS Loom, CANJST4 and CAN LAMBDA this is a simple and cost-effective solution for improving the...

[PN: 156-9000B] Link ECU G5 Voodoo Neo 6 + DI Driver 4 Bundle

DETAILS: High-Performance Direct Injection ECU Bundle Unlock full control of your high-performance engine with the G5 Voodoo Neo 6 + DI Driver‑4 Bundle. Ideal for direct injection setups, this package includes: G5 Voodoo Neo 6 ECU – Controls up to...

[PN: 156-5000] Link ECU G5 Voodoo Neo 6

DETAILS: The next generation of engine management for many more engines.  The G5 Voodoo Neo 6 can run: 8 cylinders port or direct injection and direct spark, or 6 cylinders with direct/port staged injection, and direct spark The G5 Voodoo...

[PN: 127-9800B] Link ECU G4X Monsoon Wire-In Bundle - ECU + Loom + Sensors

DETAILS: G4X Monsoon Wire-In Bundle. Everything you need to get started wiring a Link G4X MonsoonX ECU into your chosen vehicle.  This package is ideal for four cylinder engines requiring a few additional features.  Link G4X MonsoonX...

[PN: 125-9200B] Link ECU 2 x CAN Lambda (CANLAM)

DETAILS: Link’s CAN Lambda is an easy to use CAN module that provides digital wideband sensor control via CAN bus and is compatible with leading aftermarket ECUs.   This bundle contains TWO CAN Lambda units.  If using the CAN Lambda...

[PN: 122-9800B] Link ECU G4X FuryX Wire-In Bundle - ECU + Looms + Sensors

DETAILS: G4X Fury Motorsport Bundle. Everything you need to get started wiring a Link G4X FuryX into your chosen beast!  This is the ideal package for engines with up to six cylinders and wanting to run onboard digital wideband lambda control. G4X...

[PN: 101-0384] Link ECU TCC04 4 Channel EGT to CAN Module

Link TCC04 4 Channel EGT to CAN module, powered by CANchecked  The TCC04 EGT to CAN module allows you to connect up to four Type-K thermocouples and send the values via CAN bus and/or monitor them directly on your wireless enabled device. ...

[PN: 101-0388] Link ECU TCC08 8 Channel EGT to CAN Module

Link TCC08 8 Channel EGT to CAN module, powered by CANchecked The TCC08 EGT to CAN module allows you to connect up to eight Type-K thermocouples and send the values ������via CAN bus and/or monitor them directly on your wireless enabled device...

[PN: 100-0177] Link ECU LINK MXT Strada 10" Dash - Race Edition

DETAILS: Link MXT Strada 10” dash, powered by AIM.The Link MXT Strada Race edition is a full colour, 10-inch dash display with 10 RGB shift lights and six customisable alarm LED lights. It is pre-configured to work with all Link G4+/G4X/G5 Wire-In...

[PN: 100-0176] Link ECU LINK MXT Strada 10" Dash - Street Edition

DETAILS: Link MXT Strada 10” dash, powered by AIM.The Link MXT Strada Street edition is a full colour, 10-inch dash display legal for road use featuring 10 RGB shift lights and street icons above the dash. It is pre-configured to work with all Link...

[PN: 101-0054] Link ECU Knock Sensor with Loom (KNSB)

DETAILS:   Donut style 8mm Knock Sensor prewired with 2.6m loom, flying leads.  Suitable to wire directly to Link ECU or use with the G4 Knocklink Visual Warning Light.    

[PN: 101-0053] Link ECU Knock Sensor (KNS)

DETAILS: Donut style 8mm hole Includes plug and pin kit   

[PN: 114-2000] Link ECU G4 KnockLink Kit - Includes Knock Sensor+Loom (G4KNLK)

DETAILS:   Kit includes the G4 KnockLink visual warning light and a knock sensor with loom. The KnockLink is a self-calibrating, visual knock warning tool. This kit is designed for tuning, street and race use.The G4 KnockLink is the only...

[PN: 114-1000] Link ECU KnockLink G4 (G4KNL)

DETAILS:   KnockLink is a self-calibrating, visual knock warning tool. The KnockLink is designed for tuning, street and race use. Will require a knock sensor to function (sold separately) or you can purchase the KnockLink Kit that includes the...

[PN: 105-1000] Link ECU KnockBlock G4+ (KNB)

DETAILS:   The G4+ KnockBlock is an essential tool for tuning and can aid in the early detection of incorrect ignition timing, lean air/fuel mixtures and mechanical issues. It is used it with ear buds, headphones or noise cancelling ear muffs and...

[PN: 110-0005] Link ECU Mounting bracket for G4+ & G4X Atom & Monsoon (MTB2)

[PN: 100-0113] Link ECU Mounting bracket for G4+ & G4X Fury, Xtreme, Storm, Force (MTB1)

[PN: 101-0016] Link ECU Boost Control Solenoid - 4 Port (4BCS)

DETAILS:   Thinking of turning up the boost to max? Then this 4 port boost control solenoid is perfect. It allows for precise boost control of up to 120PSI.4 port Boost control soldenoids are commonly used for big boost applications,...

[PN: 101-0103] Link ECU Trigger Wheel (TWS)

DETAILS:   Small Diameter Trigger wheel – Medium and Large sizes also available.  24 tooth 150mm diameter 40mm centre