Camshafts

ACL Race Bearings Package

ACL Thrust Washers Thrustwasher Set; Aluminum Tin; Upper & Lower [PN: 2T8103-STD] ACL Toyota/Lexus 2JZGE/2JZGTE 3.0L Standard Size Thrust Washers  

1JZ/2JZ VVTI Oil Control Filter

1JZ/2JZ VVTI Oil Control Filter  This is a filter for the oil feed to your VVTI solenoid, this filter goes in the top banjo bolt right below the solenoid. 

Toyota 2JZ VVTI Solenoid

1JZ, 2JZ VVTI Solenoid - Oil Control Valve for VVTI  This is a factory Denso Japan Oil Control Valve from Toyota. Fits all 2JZ's and 1JZ's VVTI Engines

Toyota 2JZ Cam Sensor

* RAD DAN SUPRA ITEM * 1JZ, 2JZ Cam Position Sensor This is a factory Denso Japan Cam Position Sensor from Toyota. Fits all 2JZ's and 1JZ's. 

RAD Industries Cam Sensor Delete

The RAD Industries Billet Cam Sensor Delete for 2JZ/1JZ Non-VVTI-GTE Heads fits both 2JZ GTE and 1JZ GTE heads where you need to block off one of the cam sensors after going to an aftermarket ECU...

Toyota VVTI Cam Gear Cap and Seal

* RAD DAN SUPRA ITEM * This is a Factory Toyota VVTI Cam Gear Cap and Seal, this will work on all 2JZ and 1JZ VVTI cam gears, GE and GTE. This cap is what seals in the oil pressure, this cap

Toyota VVTI Cam Gear Bolt

* RAD DAN SUPRA ITEM * This is a Factory VVTI Cam Gear Allen Bolt, this is the bolt that holds down the cam gear to the camshaft.  Fits all 2JZ and 1JZ VVTI cams. GTE and GE 

Toyota 2JZ/1JZ VVTI Cam Gear

This is an OEM Toyota 2JZ/1JZ VVTI Cam Gear fits all VVTI 2JZ / 1JZ GTE, GE engines. This goes on the intake cam of your VVTI engine. This is a new in the box from Toyota cam gear. NOT INCLUDED -...

VVTI Cam Gear Seal

This is an OEM Toyota 2JZ VVTI Cam Gear Seal. This seal fits all VVTI - 2JZs GTE, GE, 1JZ. This item is included in our Toyota 2JZ-GTE Race Gasket Kit, Toyota 2JZ-GE Race Gasket Kit check it out!

Toyota 2JZ Cam Seals (Pair)

* RAD DAN SUPRA ITEM * These Cam Seals are sold as a pair (2) and work with all 2JZ engines, GE and GTE as well as VVTI and NON VVTI.  These seals will also work with NON VVTI 1JZ engines.  They will...

[PN: BC0302] Brian Crower Toyota 2JZGTE Camshafts-Stage3-272 Spec

Cam Card Camshafts; Stage 3; Set of Two Race SpecificationLonger duration profile, added rpm potential. Intended for fully built engine. Tuning and ECU mods recommended. Requires kit BC0300. The...

[PN: GSC3031] GSC Power-Division Exhaust Valve Guide for Toyota 2JZ-GTE - Single / Set of 12

* RAD DAN SUPRA ITEM * GSC Power-Division Exhaust Valve Guide for Toyota 2JZ-GTE Standard sized sold as set of 12 or individually Oversized sold individually as +0.001" and +0.003" GSC30

[PN: GSC3032] GSC Power-Division Intake Valve Guide for Toyota 2JZ - Single / Set of 12

* RAD DAN SUPRA ITEM * GSC Power-Division Intake Valve Guide for Toyota 2JZ Standard sized sold as set of 12 or individually Oversized sold individually as +0.001" and +0.003" GSC3032 Standard...

[PN: GSC2061] GSC Power-Division STD Exhaust Valve for 2JZ-GE/GTE - Single / Set of 12

* RAD DAN SUPRA ITEM * Stem Diameter (mm) Overall Length (mm) Head Diameter (mm) 6 99.00 29.00 When creating our new valve line we set out to create the best perfo

[PN: GSC2062] GSC Power-Division STD Intake Valve for 2JZ-GE/GTE - Single / Set of 12

* RAD DAN SUPRA ITEM * Stem Diameter (mm) Overall Length (mm) Head Diameter (mm) 6 98.40 33.50 When creating our new valve line we set out to create the best perfo

[PN: GSC2063] GSC Power-Division +1mm Exhaust Valve for 2JZ-GE/GTE - Single / Set of 12

Stem Diameter (mm) Overall Length (mm) Head Diameter (mm) 6 99.00 30.00 When creating our new valve line we set out to create the best performance, longest lasting valves available to the...

[PN: GSC2064] GSC Power-Division +1mm Intake Valve for 2JZ-GE/GTE - Single / Set of 12

Stem Diameter (mm) Overall Length (mm) Head Diameter (mm) 6 98.40 34.50 When creating our new valve line we set out to create the best performance, longest lasting valves available to the...

[PN: GSC2065] GSC Power-Division Super Alloy STD Exhaust Valve 2JZ-GE/GTE - Single / Set of 12

Stem Diameter (mm) Overall Length (mm) Head Diameter (mm) 6 99.00 29.00 GSC Power-Division Super Alloy Exhaust Valves for the 2JZ are for those running high horsepower, high EGT set ups that...

[PN: GSC2067] GSC Power-Division Super Alloy +1mm Exhaust Valve 2JZ-GE/GTE - Single / Set of 12

Stem Diameter (mm) Overall Length (mm) Head Diameter (mm) 6 99.00 30.00 GSC Power-Division Super Alloy Exhaust Valves for the 2JZ are for those running high horsepower, high EGT set ups that...

[PN: GSC7030S1] GSC Power-Division Billet 2JZ-GTE S1 Camshafts

* RAD DAN SUPRA ITEM *

[PN: GSC7030S2] GSC Power-Division Billet 2JZ-GTE S2 Camshafts

[PN: GSC7030S3] GSC Power-Division Billet 2JZ-GTE S3 Camshafts

[PN: GSC7031S1] GSC Power-Division Billet VVTI 2JZ-GTE S1 Camshafts

[PN: GSC7031S2] GSC Power-Division Billet VVTI 2JZ-GTE S2 Camshafts

[PN: GSC7031R2] GSC Power-Division Billet VVTI 2JZ-GTE R2 Camshafts

[PN: GSC7030R2] GSC Power-Division Billet 2JZ-GTE R2 Camshafts

[PN: GSC7030R2M] GSC Power-Division Billet 2JZ-GTE R2M Camshafts

[PN: GSC5044] GSC Power-Division Beehive Valve Spring with Ti Retainer for the Toyota 2JZ

[PN: GSC5744] GSC Power-Division Single Spring with Ti Retainer Kit for the Toyota 2JZ & 1JZ

[PN: GSC5064] GSC Power-Division CONICAL Valve Spring with Ti Retainer for the Toyota 2JZ & 1JZ

[PN: GSC5066] GSC Power-Division CONICAL High Pressure Valve Spring with Ti Retainer for the Toyota 2JZ & 1JZ

* RAD DAN SUPRA ITEM * GSC Power-Division CONICAL High Pressure

[PN: GSC5266] GSC Power-Division Dual Valve Spring Kit with Titanium Retainer for Toyota 2JZ Platform

GSC Power-Division Dual Valve Spring Kit with Titanium Retainer for Toyota 2JZ Platform 125lbs @ 1.258" install height 254lbs @ 0.811" GSC5266 Dual Valve Spring Kit wit

[PN: GSC1030] GSC Power-Division Viton Valve Stem Seals for Toyota 1JZ/2JZ Platforms - Set of 24

* RAD DAN SUPRA ITEM * GSC Power-Division Viton Valve Stem Seals for Toyota 1JZ/2JZ Platforms. These are an upgrade from the standard OEM material to help cope with the higher heat caused by high...

[PN: GSC1029] GSC Power-Division Viton Valve Stem Seals for Toyota 2JZ 6.6mm Valve Stem - Set of 12

GSC Power-Division Viton Valve Stem Seals for Toyota 2JZ 6.6mm valve stem. These are an upgrade from the standard OEM material to help cope with the higher heat caused by high performance engines...

[PN: GSC2069-12] GSC Power-Division 6.6mm stem Super Alloy +1mm Exhaust Valve 2JZ-GE/GTE - Set of 12

Stem Diameter (mm) Overall Length (mm) Head Diameter (mm) 6.6 99.20 30.0

[PN: GSC3113-12] GSC Power-Division 6.6mm Exhaust Valve Guide for Toyota 2JZ-GTE with Depth Step - Set of 12

GSC Power-Division 6.6mm Exhaust Valve Guide for Toyota 2JZ-GTE with depth gauge Standard sized sold as set of 12 or individually Oversized sold individually as +0.001" and +0.003" MUST BE USED WITH...