Accessories

[PN: 101-0212] Link ECU CANTEE - Link CAN Splitter Cable

DETAILS: CAN Splitter Cable for connecting an additional CAN devices. Use to connect from a CANJST, CANLTW or CANSS into 2 CAN devices.   Specs DTM4 Female to 2 x DTM4 Male. Includes CAN and Power Wiring.  Loom 1 Length: 80mm  Loom 2...

[PN: 101-0211] Link ECU CANLTW - CAN Connection Cable for WireIn ECU���������s (6Pin CAN)

DETAILS: Required to add CAN communication to WireIn ECU's which have CAN accessible via the 6Pin round CAN connector on the front of the ECU.     Compatible ECU's:G5 Voodoo Pro (CAN1)G4X/G4+ Xtreme (CAN1)  G4X/G4+ Fury...

[PN: 101-0210] Link ECU CANSS - CAN Connection Cable for WireIn ECU���������s (ECU Header CAN)

DETAILS: Required to add CAN communication to WireIn ECU's which have CAN accessible via the Header.   Compatible ECU's:G4X/G4+ Atom (CAN1)G4X/G4+ Monsoon (CAN1)G4X/G4+ Storm (CAN2)G4X/G4+ Xtreme (CAN2)G4X/G4+ Fury (CAN2)G5 Voodoo Pro (CAN1)G4+...

[PN: 101-0198] Link ECU CANJST4 - CAN Connection Cable for Plugin ECU's (4pin)

DETAILS: Required to add CAN communications & power to recently released G4X Plugin ECU’s which have the new 4 Pin powered CAN connector (not the older 5pin CAN connector).  Plugs directly into the socket on the ECU PCB, provides CAN and a...

[PN: 101-0197] Link ECU CANJST - CAN Connection Cable for Plugin ECU's (5pin)

DETAILS: Used to add CAN communications to G4+/G4X Plugin ECU’s which have a 5 Pin CAN connector.  Plugs directly into the CAN socket on the ECU PCB. 12V and Ground via flying lead. Terminates to a DTM4 Male Connector which is compatible with...

[PN: 101-0104] Link ECU Cable (USBM)

DETAILS: USB Mini Cable. Used to connect ECU to computer for tuning.  Suitable for: G4X Atom G4X Monsoon G4+ Atom G4+ Kurofune G4+ Monsoon    

[PN: 101-0033] Link ECU Dual Core Cable (C2C10)

DETAILS: Dual core screen cable for use with trigger signals and knock sensors - 10m per pack  

[PN 101-0001] Link ECU Tuning Cable (CUSB)

DETAILS: Link CAN to USB Tuning Cable. Used to connect the ECU to a computer via USB. A CAN to Serial cable is also available.  Compatible with: Link G4X Storm  Link G4X and G4+ Fury  Link G4X and G4+ Xtreme Link G4+ Thunder  All...

[PN: 101-0023] Link ECU Tuning Cable (CANSER)

DETAILS: Link CAN to Serial (DB9 Female connector) Tuning Cable. Used to connect ECU to a computer with a serial interface (DB9 Male). A USB tuning cable is also available.  Compatible with: Link G4X Storm  Link G4X and G4+ Fury  Link...

[PN: 101-0022] Link ECU Cable (CANPCB)

DETAILS: Required to add CAN/Serial communications to G4+/G4X Plugin ECU’s. Plugs directly into ECU PCB header. Use the Link CANF connector (purchased separately) to connect.         

[PN: 101-0106] Link ECU XS Expansion Loom (XSL)

DETAILS: Want to add additional inputs/output to your Link Plugin ECU? Use the XS Loom. The Link XS Loom plugs into the expansion connector on all Link G4, G4+ and G4X plug-in ECUs. The number of extra inputs and outputs added by the XS Loom is dependent...

[PN: 101-0010] Link ECU Old G4 Atom & Lightning 5m (5LT)

DETAILS: 5 m, to suit obsolete G4 Atom and Lightning only. Does NOT fit G4+ Atom  

[PN: 101-0009] Link ECU B Loom Long (5LB)

DETAILS: 5 m long 'B' loom to suit G4, G4+ and G4X ECUsPerfect for all custom wiring jobs utilising Link WireIn ECUs. The ‘B’ Loom has a Link ‘B’ ECU connector at one end and unterminated wires at the other. All wires are colour...

[PN: 101-0008] Link ECU A Loom Long (5LA)

DETAILS: 5 m long 'A' loom to suit G4, G4+ and G4X ECUsPerfect for all custom wiring jobs utilising Link WireIn ECUs. The ‘A’ Loom has a Link ‘A’ ECU connector at one end and unterminated wires at the other. All wires are colour...

[PN: 101-0006] Link ECU B Loom Medium (2LB)

DETAILS: 2.5 m long 'B' loom to suit G4, G4+ and G4X ECUsPerfect for all custom wiring jobs utilising Link WireIn ECUs. The ‘B’ Loom has a Link ‘B’ ECU connector at one end and unterminated wires at the other. All wires are colour...

[PN: 101-0005] Link ECU A Loom Medium (2LA)

DETAILS: 2.5 m long 'A' loom to suit G4, G4+ and G4X ECUsPerfect for all custom wiring jobs utilising Link WireIn ECUs. The ‘A’ Loom has a Link ‘A’ ECU connector at one end and unterminated wires at the other. All wires are colour...

[PN: 101-0003] Link ECU B Loom Short (0LB)

DETAILS: 0.4m long 'B' loom to suit G4, G4+ and G4X Wire-In ECUsPerfect for all custom wiring jobs utilising Link WireIn ECUs. The ‘B’ Loom has a Link ‘B’ ECU connector at one end and unterminated wires at the other. All wires are...

[PN: 101-0194] Link ECU Electronic Throttle Body Kit - 74mm (ETB74)

DETAILS: 74mm Electronic Throttle Body 74mm Bore size Dual potentiometer redundancy Bosch quality and performance Includes groove on inlet port flange Includes mating connector kit Technical Specs:See attached image. Further details on...

[PN: 101-0190] Link ECU Electronic Throttle Body Kit - 82mm (ETB82)

DETAILS: 82mm Electronic Throttle Body 82mm Bore size Dual potentiometer redundancy Bosch quality and performance Includes groove on inlet port flange Includes mating connector kit Technical Specs:See attached image. Further details on...

[PN: 101-0188] Link ECU E-Throttle Accelerator Pedal Module (PED)

DETAILS: E-Throttle Accelerator Pedal Module Firewall mounted hanging design 16degree (~70mm) travel Redundant dual output potentiometers suitable for use with Electronic throttle bodies Includes 6 pin mating connector kit Technical...

[PN: 109-9000B] Link ECU G4X XtremeX ECU + Terminated LS Engine Harness Drive-by-Wire Bundle

Harness Manual Online Instruction Manual   The quickest, easiest, tidiest and most cost effective way to connect a Link ECU to your Drive-by-Wire/E-Throttle LS V8 engine.  Bundle Includes: G4X XtremeX ECU (8 x Injector and 8 x Ignition Drives)...

[PN: 108-9000B] Link ECU G4X StormX ECU + Terminated LS Engine Harness Drive-by-Cable Bundle

Harness Manual Online Instruction Manual   DETAILS: The quickest, easiest, tidiest and most cost effective way to connect a Link ECU to your Drive-by-Cable LS V8 engine.  Bundle Includes: G4X StormX ECU (8 x Injector and 8 x...

[PN: 101-0307] Link ECU LS Gen 3 to Gen 4 Cam Sensor Conversion Harness

DETAILS: Adapter harness to run the Gen 4 front mounted under water pump Cam Sensor on the Gen 3 LS Engine.    

[PN: 101-0306] Link ECU LS Gen 4 Knock Adapter Loom

DETAILS: Intended for use with our terminated LS engine harness. Plug and play compatibility with Gen 4 Knock Sensors in factory location.       

[PN: 101-0305] Link ECU LS Gen 3 Knock Adapter Loom

DETAILS: •    Intended for use with our terminated LS engine harness. Plug and play compatibility with factory Gen 3 Knock Sensor loom (located in the valley).     

[PN: 101-0304] Link ECU LS DBW Adapter Loom

DETAILS: •    Intended for use with our terminated LS engine harness. Plug and play compatibility for Gen 4 LS DBW throttle bodies.  •    This adapter loom terminates to Aux 9/10, 5v reference,...

[PN: 101-0302] Link ESU LS Map Adapter Harness

DETAILS: •    Intended for use with our terminated LS engine harness. Plug and play compatibility for Gen 3 LS map sensors

[PN: 101-0301] Link ESU LS Stepper Adapter Harness

DETAILS: •    Intended for use with our terminated LS engine harness. Plug and play compatibility with GM LS IAC stepper motors. If you are planning to run a drive by cable configuration on our terminated LS harness you will need...

[PN: 101-0015] Link ECU Boost Control Solenoid - 3 Port (3BCS)

DETAILS: More boost? Of course and this 3 port boost control solenoid will help you do it. 3 port boost control solenoids are the go-to for the majority of boost control applications, they allow for precise control of boost and boost levels can be...

[PN: 125-1000] Link ECU CAN Lambda (CANLAM)

Download the CAN-Lambda QuickStart Guide Download the CAN-Lambda manual DETAILS: Link’s CAN Lambda is an easy to use CAN module that provides digital wideband sensor control via CAN bus and is compatible with leading aftermarket ECUs.If using the...

[PN: 100-0170] Link ECU AIM GPS09 Module for AIM Dashes

DETAILS: Add-on GPS module for the MXS and MXG Strada Dashes. 1.3m cable length.FEATURES: Sample lap and split times as well as speed, position and acceleration - all the information needed for engine tuning as well as for improving your driving...

[PN: 100-0168] Link ECU LINK MXS Strada 5" Dash - Street Edition

  DETAILS: Link MXS Strada 5” dash, powered by AIM.The Link MXS Strada Street edition is a full colour, 5-inch dash display legal for road use featuring 10 RGB shift lights and street icons down the side of the dash. It is pre-configured to...

[PN: 101-0127] Link ECU LSU 4.9 Plug Kit (PKLSU)

[PN: 101-0276] Link ECU CAN Keypad Insert - Arrow

[PN: 101-0234] Link ECU Link CAN Keypad 4 button

  DETAILS: Rugged 4 key CAN Keypad with interchangeable 15mm inserts (sold separately).Custom button inserts and configurable RGB indicator rings per button allow for extremely flexible set-ups.The keypad is designed for ultimate reliability -...

[PN: 101-0020] Link ECU Plug (CANF)

Field Installable CAN Plug - Can be used to wire in to the 6 pin CAN port on Link G4/G4+/G4X ECUs that have a round 6 pin CAN communication port. Requires soldering for assembly. Also see 101-0211, CANLTW - CAN Connection Cable for WireIn ECU’s...