[PN: 101-0320] Link ECU Combined Pressure and Temperature Sensor (CPTS) MSRP: Was: Now: $180.00 Add to Cart
[PN: 101-0384] Link ECU TCC04 4 Channel EGT to CAN Module Link TCC04 4 Channel EGT to CAN module, powered by CANchecked The TCC04 EGT to CAN module allows you to connect up to four Type-K thermocouples and send the values via CAN bus and/or monitor them directly on your wireless enabled device. ... MSRP: Was: Now: $280.00 Add to Cart
[PN: 101-0388] Link ECU TCC08 8 Channel EGT to CAN Module Link TCC08 8 Channel EGT to CAN module, powered by CANchecked The TCC08 EGT to CAN module allows you to connect up to eight Type-K thermocouples and send the values ������via CAN bus and/or monitor them directly on your wireless enabled device... MSRP: Was: Now: $335.00 Add to Cart
[PN: 101-0053] Link ECU Knock Sensor (KNS) DETAILS: Donut style 8mm hole Includes plug and pin kit MSRP: Was: Now: $115.00 Add to Cart
[PN: 101-0280] Link ECU Hall Effect Sensor Kit DETAILS: Hall effect sensor designed for use in applications where ferrous edge detection/near zero speed sensing is needed. They provide a sinking current output. Typical automotive applications include: Crank & Cam Signals... MSRP: Was: Now: $85.00 Add to Cart
[PN: 101-0025] Link ECU Crank Angle Sensor (CAS) DETAILS: Used in conjunction with a trigger wheel to measure crank angle, a vital measurement for engine operation. Can be used with almost any steel trigger wheel, see related products for our trigger wheel options. FEATURES: ... MSRP: Was: Now: $160.00 Add to Cart
[PN: 101-0100] Link ECU Throttle Position Sensor (TPSCW/CCW) DETAILS: Throttle Position Sensor. Supports clockwise and counter-clockwise installations. 6 wire flying lead. Wiring instructions are provided in the box. FEATURES: 8 mm D-Shaft Rotary Sensor Hall Effect non-contact technology... MSRP: Was: Now: $235.00 Add to Cart
[PN: 101-0146] Link ECU Exhaust Gas Temperature Probe (EGT) DETAILS: Extreme Duty Fast Response EGT Temperature Probe Type K thermocouple probe Exposed sensing junction for fastest response Includes 316 SS adjustable compression fitting Stainless steel protected wires Designed for extreme... MSRP: Was: Now: $145.00 Add to Cart
[PN: 101-0034] Link ECU Ethanol Content Sensor (ECS) DETAILS: Looking to run flex-fuel? Then the Ethanol Content Sensor is a must have. The Ethanol Content Sensor measures the ratio of ethanol to petrol in a flex fuel vehicle. This sensor also measures fuel temperature. Compatible with all... MSRP: Was: Now: $265.00 Add to Cart
[PN: 101-0077] Link ECU Coolant Temperature Sensor (NTC12) DETAILS: Includes Plug Kit - 2 way Bosch Style plug, terminals and boot M12 Thread MSRP: Was: Now: $65.00 Add to Cart
[PN: 101-0076] Link ECU Coolant Temperature Sensor (NTC1-8) DETAILS: Includes 2-pin Deutsch DTM connector kit Aluminium and steel weld in mounting bosses available 1/8" NPT Thread MSRP: Was: Now: $65.00 Add to Cart
[PN: 101-0050] Link ECU Mounting Boss Steel (IATBMS) DETAILS: Weld in Steel Boss. Bosch part. Suitable for mounting the IATB Inlet Air Temperature sensor and other sensors that mount via a Bosch style flange. MSRP: Was: Now: $21.00 Add to Cart
[PN: 101-0049] Link ECU Mounting Boss Aluminium (IATBMA) DETAILS: Weld in Aluminium Boss. Bosch part. Suitable for mounting the IATB Inlet Air Temperature sensor and other sensors that mount via a Bosch style flange. MSRP: Was: Now: $24.00 Add to Cart
[PN: 101-0048] Link ECU Air Temperature Sensor (IATB) DETAILS: Includes Plug Kit - 2 way Bosch Style plug, terminals and boot Aluminium and steel weld in mounting bosses available (IATBMA & IATBMS) MSRP: Was: Now: $85.00 Add to Cart
[PN: 101-0047] Link ECU Mounting Boss Steel (IAT1-8MS) DETAILS: Weld in steel boss, 1/8" NPT Thread. Suitable for mounting Intake air temperature (IAT1-8), Coolant Temperature sensors (NTC1-8) and other sensors that use 1/8" NPT Thread. MSRP: Was: Now: $21.00 Add to Cart
[PN: 101-0046] Link ECU Mounting Boss Aluminium (IAT1-8MA) DETAILS: Weld in Aluminium boss, 1/8" NPT Thread. Suitable for mounting Intake air temperature (IAT1-8), Coolant Temperature sensors (NTC1-8) and other sensors that use 1/8" NPT Thread. MSRP: Was: Now: $24.00 Add to Cart
[PN: 101-0045] Link ECU Air Temp Sensor (IAT1-8) DETAILS: Includes 2-pin Deutsch DTM connector kit Aluminium and steel weld in mounting bosses available 1/8" NPT Thread MSRP: Was: Now: $90.00 Add to Cart
[PN: 101-0199] Link ECU Adapter M10 x 1 Female to 1/8 BSP Male DETAILS: Stainless Steel thread adapter, M10 x 1 Female to 1/8 BSP Male, Adapts popular Bosch Metric Pressure Sensors to suit 1/8 BSP threaded ports. MSRP: Was: Now: $21.00 Add to Cart
[PN: 101-0193] Link ECU Adapter M10 x 1 Female to 1/8 NPT Male DETAILS: Stainless Steel thread adapter, M10 x 1 Female to 1/8 NPT Male, Adapts popular Bosch Metric Pressure Sensors to suit 1/8 NPT threaded ports. MSRP: Was: Now: $21.00 Add to Cart
[PN: 101-0186] Link ECU 140 Bar Pressure Sensor (HPS) Technical Specs:Up to 2030 PSI above atmospheric pressure, cannot be used to read vacuumSee attached image for more. DETAILS: High Pressure sensor for Liquid. Use for Fuel, Clutch, Brake etc. 140 Bar/2030PSI 45degree cone... MSRP: Was: Now: $115.00 Add to Cart
[PN: 101-0080] Link ECU Pressure Sensor (PS150) DETAILS: Oil or Fuel pressure 10 Bar/150psi 1/8” NPT Thread Includes plug and pin kit Technical Specs and WiringUp to 150 PSI above atmospheric pressure, cannot be used to read vacuum0.5v = 0bar / 0PsiG4.5v = 10 Bar / 145... MSRP: Was: Now: $220.00 Add to Cart
[PN: 101-0320] Link ECU Combined Pressure and Temperature Sensor (CPTS) Technical Specs: See attached image. DETAILS: Two sensors in one - Combined 10 bar (145 psi) Liquid Pressure sensor and -40 to 140 deg C L Liquid Temperature sensor. Suitable for Oil, Coolant, Fuel, Transmission fluid etc. Up... MSRP: Was: Now: $180.00 Add to Cart
[PN: 101-0298] Link ECU 8 Bar MAP Sensor EU (MAP8EU) DETAILS: The 8 Bar MAP Variohm Eurosensor reads up to 7 Bar absolute pressure. This means that it is suitable for turbo or supercharged applications running up to 7 Bar (or 101psi) of boost pressure. Includes Plug and Pins Push wire... MSRP: Was: Now: $245.00 Add to Cart
[PN: 101-0295] Link ECU 5 Bar MAP Sensor EU (MAP5EU) DETAILS: The 5 Bar MAP Variohm Eurosensor reads up to 4 Bar absolute pressure. This means that it is suitable for turbo or supercharged applications running up to 4 Bar (or 58psi) of boost pressure. Includes Plug and Pins Push wire through... MSRP: Was: Now: $225.00 Add to Cart
[PN: 101-0164] Link ECU 3 Bar MAP Sensor (MAP3) DETAILS: This Link MAP sensor reads up to 3 Bar absolute pressure. This means that it is suitable for turbo or supercharged applications running up to 2.0 Bar (or 29psi) of boost pressure. The wiring pinout for this sensor is indicated on the... MSRP: Was: Now: $140.00 Add to Cart
[PN: 101-0163] Link ECU 2.5 Bar MAP Sensor (MAP2.5) DETAILS: The Link 2.5 Bar MAP sensor reads up to 2.5 Bar absolute pressure. This means that it is suitable for turbo or supercharged applications running up to 1.5 Bar (approx 22psi) of boost pressure. The wiring pinout for this sensor is... MSRP: Was: Now: $135.00 Add to Cart
[PN: 101-0162] Link ECU 1.15 Bar MAP Sensor (MAP1.15) DETAILS: The Link 1.15 Bar MAP sensor reads up to 1.15 Bar absolute pressure. This means it is suitable for use in naturally aspirated engines. This MAP sensor can also be used in applications where positive intake pressures of up to 0.15 Bar... MSRP: Was: Now: $130.00 Add to Cart
[PN: 101-0165] Link ECU Link 4 Bar MAP Sensor (MAP4) DETAILS: The Link 4 Bar MAP sensor reads up to 4 Bar absolute pressure. This means that it is suitable for turbo or supercharged applications running up to 3.0 Bar (or 44psi) of boost pressure. The wiring pinout for this sensor is marked directly... MSRP: Was: Now: $145.00 Add to Cart
