[PN: 20-0278] Radium Fuel Cell Weld Flange, Raw Alum w/ Gasket MSRP: $89.95 Was: Now: $85.45 Add to Cart
[PN: 20-0687-00] Radium Dump Can Cap Assembly, Standard Filler MSRP: $59.95 Was: Now: $56.95 Add to Cart
[PN: 20-0596] Radium Early Model Fuel Level Adapter, 350Z G35 MSRP: $49.95 Was: Now: $47.45 Add to Cart
Radium Replacement Fuel Cell Bladders MSRP: $419.95 - $499.95 Was: Now: $398.95 - $474.95 Choose Options
[PN: 20-048] Radium Fuel Cell Vent Kits MSRP: $44.95 - $59.95 Was: Now: $42.70 - $56.95 Choose Options
Radium Dry Break Fuel Cell Fillers MSRP: $149.95 - $339.95 Was: Now: $142.45 - $322.96 Choose Options
Radium Fuel Level Switch and Diagnostic Indicator MSRP: $29.95 - $109.95 Was: Now: $28.45 - $104.45 Choose Options
[PN: 20-0146] Radium Fuel Level Sender Block Off Fuel Level Sender Options can be purchased separately HERE. 20-0146 Fuel Level Sender Block-OffThis block-off plate kit is used when the 5-bolt SAE flanged fuel level se MSRP: $34.95 Was: Now: $33.20 Add to Cart
[PN: 20-0439] Radium 12AN ORB to 5-Bolt Adapter Fuel Level Sender Options can be purchased separately HERE. 20-0439 12AN ORB to 5-Bolt SAE AdapterWhen a level sender is not used, this adapter can be used to increase venting for custom... MSRP: $34.95 Was: Now: $33.20 Add to Cart
[PN: 20-0350] Radium Fuel Level Sender Adapter, Denso COMPATIBILITYMitsubishi EVO XScion FR-SSubaru BRZToyota GT86Toyota GR86Compatible with 15-21 Subaru WRX, but 20-0850 should be used specifically for the Radium pu MSRP: $19.95 Was: Now: $18.95 Add to Cart
[PN: 20-0548-V] Radium Fuel Cap, Remote Mount, Vented 20-0548-V Fuel Cap, Remote Mount, VentedThis is replacement vented fill cap. This is included with 20-0505-V and is compatible with 20-0504-V. MSRP: $39.95 Was: Now: $37.95 Add to Cart
Radium Remote Mount Fuel Fillers Installation Instructions OVERVIEW A remote mounted fuel filler is NOT located directly on the fuel tank or fuel cell, but rather somewhere else on the vehicle, such as the fender. It is made up of 3... MSRP: Was: Now: $0.00 Choose Options
[PN: 20-0360] Radium Fill Neck Block-Off Kit 20-0360 Filler Block-OffThis kit blocks off the filler hole on the Radium FCST units.Included:-Machined and Anodized Aluminum Blank Plate-FKM Gasket Flange Seal-Stainless Steel Hardware MSRP: $34.95 Was: Now: $33.20 Add to Cart
[PN: 20-0148-V] Radium V Fill Neck Cap, Vented 20-0148-V Fill Neck Cap OnlyThis is replacement fill neck cap. Compatible with Radium Engineering 20-0197-V.Included: -Vented Fuel Fill Cap-Roll Over Protection-FKM O-ring -Tether Hardware MSRP: $34.95 Was: Now: $33.20 Add to Cart
[PN: 18-0019] Radium Gasket, 6-Bolt Fill Neck, 2.18" BC 18-0019 Gasket, 6-Bolt Fill Neck, 2.18" BCThis gasket is used for Radium fuel cell fill necks. The 1/16" thick material is a premium quality variation of FKM. It uses 6 equally-spaced holes with a 2... MSRP: $9.95 Was: Now: $9.45 Add to Cart
[PN: 14-0584] Radium Fuel Cell Nut Ring, Black Anodized This nut ring is manufactured from 6061 aluminum and is anodized to permit all fuel types and to prevent corrosion. All threaded holes are tapped for 1/4"-28 using the industry standard 6x10 pattern... MSRP: Was: Now: $59.95 Add to Cart
[PN: 20-0278] Radium Fuel Cell Weld Flange, Raw Alum w/ Gasket Fuel cell 6x10 inch, 24-bolt weld flange. CNC machined from 6061 billet aluminum and flycut to 0.24" thickness. Includes gasket.Ideal for welding to an aluminum tank. Welding must be performed by an... MSRP: $89.95 Was: Now: $85.45 Add to Cart
[PN: 20-1014] Radium FCST Lift Pump Mounts, Mid Depth These stainless steel brackets are designed to properly mount the Fuel Cell Surge Tank (FCST) lift pump to the bottom of the fuel cell. The standard FCST lift pump brackets are designed for fuel... MSRP: $34.95 Was: Now: $33.20 Add to Cart
[PN: 18-0015] Radium Fuel Cell Gasket, 6x10, 24-Bolt Radium Engineering gasket for "industry standard" 6x10 inch (24-bolt) fuel cells. Unlike others constructed from cork or paper, this seal is die cut from a premium quality variation of FKM. The... MSRP: $39.95 Was: Now: $37.95 Add to Cart
[PN: 20-1687-01] Radium Dump Can Cap Assembly Dry Break Radium Engineering quick fill dry-break probe assembly with screw-on cap for dump can. Features pressure relief valve (PRV). MSRP: Was: Now: $313.45 Add to Cart
[PN: 20-0931] Radium Spare Tire Fuel Cell Mounting Kit Click here to download installation instructions (PDF) This bracket kit provides a simple fuel cell mounting solution in the spare tire well area. MSRP: $359.95 Was: Now: $341.95 Add to Cart
[PN: 20-0687-00] Radium Dump Can Cap Assembly, Standard Filler Commonly used as a replacement part or for transfering fuel from a dry break to a simple container. COMPATIBLE WITH THE FOLLOWING:1. 20-0697-00 QUICK FILL DUMP CAN, 6 GALLON, STANDARD FILLER2... MSRP: $59.95 Was: Now: $56.95 Add to Cart
[PN: 20-0421] Radium EVO X Fuel Tank Pressure Plug Many vehicles outside of North America did not come standard with the OEM fuel tank pressure sensor. This part is necessary to plug the port hole on the fuel hat top. To secure, use the 2 button head... MSRP: $19.95 Was: Now: $18.95 Add to Cart
[PN: 20-0596] Radium Early Model Fuel Level Adapter, 350Z G35 As shown below, this kit is necessary to adapt the early style OEM level sensor to the stainless steel bracket included in the FHST.COMPATIBILITYNISSAN 350ZJan02 - Jan04 MSRP: $49.95 Was: Now: $47.45 Add to Cart
[PN: 14-0571] Radium Plastic Vent Flip Cap Industry-standard black plastic vent flip cap. This can be used as a replacement for all Radium Engineering quick-fill dump cans. Furthermore, it can also be custom installed into a non-vented... MSRP: $4.95 Was: Now: $4.70 Add to Cart
Radium Replacement Fuel Cell Cans This is a replacement for the aluminum can that protects the internal fuel bladder. Compatible with Radium RA-series fuel cells. Each replacement fuel cell can contains the following:-Black Powder... MSRP: $369.95 - $849.95 Was: Now: $351.45 - $807.45 Choose Options
Radium Replacement Fuel Cell Bladders These are replacement bladders for Radium RA-series fuel cells. Includes-Fuel Cell Bladder-Fuel Cell Foam-FiA Certification-SFI Certification MSRP: $419.95 - $499.95 Was: Now: $398.95 - $474.95 Choose Options
[PN: 20-048] Radium Fuel Cell Vent Kits The vent permits air to escape as the fuel cell is filled and permits filtered air to enter when fuel is getting consumed. This allows the tank to breath to avoid pressurization during normal... MSRP: $44.95 - $59.95 Was: Now: $42.70 - $56.95 Choose Options
[PN: 20-0214] Radium FCST Lift Pump Mounts, All Depths These stainless steel brackets are designed to properly mount the Fuel Cell Surge Tank (FCST) lift pump to the bottom of the fuel cell. The standard FCST lift pump brackets are designed for fuel... MSRP: $49.95 Was: Now: $47.45 Add to Cart
[PN: 20-0180] Radium Venturi Jet Pump Kit Click here to download installation instructions (PDF) MSRP: $89.95 Was: Now: $85.45 Add to Cart
[PN: 20-0151] Radium Fuel Collection Check Valve Multiple check valves are commonly used within a fuel cell collector box to protect against fuel slosh. The check valve functions similar to a trap door and keeps fuel contained in the collector box... MSRP: $59.95 Was: Now: $56.95 Add to Cart
[PN: 20-0128-01] Radium 6AN Bulkhead Plate This Radium bulkhead plate kit is great when multiple -6AN bulkhead fittings need to pass through a wall, floor, etc. The plate gives a finished look and is necessary when mounting through a soft... MSRP: $54.95 Was: Now: $52.20 Add to Cart
[PN: 18-0066] Radium Fuel Cell Foam Mandated by the FiA, fuel cell foam is used both as an explosion suppressant as well as baffling. This reticulated foam is manufactured from polyurethane and meets MIL-DTL-83054C Type-II. At 15 pores... MSRP: $69.95 Was: Now: $66.45 Add to Cart
[PN: 18-0026] Radium Duckbill Valve A duckbill is a one-way valve. They prevent aeration, and reduce fuel slosh noise and are commonly used on the return hose inside fuel tanks to prohibit fuel backflow for fire safety. When used with... MSRP: $14.95 Was: Now: $14.20 Add to Cart
[PN: 20-0604] Radium Dry Break Dust Cap Designed to install specifically into a Radium Engineering female dry break. It prevents dirt and debris from falling into the fuel tank during refueling.The dust cap vents to balance internal fuel... MSRP: $39.95 Was: Now: $37.95 Add to Cart
[PN: 15-0004] Radium Dry Break Probe Cover Designed to protect dirt and debris from contaminating the dynamic elements of a 1.5" dry break probe. Because it is manufactured from polyurethane leather, it does not dry out or absorb water making... MSRP: $29.95 Was: Now: $28.45 Add to Cart
Radium Dry Break Fuel Cell Fillers OVERVIEW Dry breaks allow quick fuel filling with no mess. The male dry break probe connects to a dump can fuel jug and the female dry break receiver installs on the vehicle's fuel filler. When the... MSRP: $149.95 - $339.95 Was: Now: $142.45 - $322.96 Choose Options
[PN: 14-0434] Radium 12AN ORB to 12AN Male This would be used if the external quick fill DSV needs to be remotely mounted off the fuel cell. It will secure directly into the 12AN ORB Vent Port on the 20-049X-XX FCST.Or it can be used in... MSRP: $19.95 Was: Now: $18.95 Add to Cart
Radium Roll Over and Dynamic Safety Vent Valves Radium Engineering vent valves feature roll-over protection for fuel cells and gas tanks. The valves come in different varieties for all fill type applications; standard fill and quick-fill. Simply... MSRP: $44.95 Was: Now: $0.00 Choose Options
Radium PushLok Hose Ends Reuseable black aluminum PushLok hose ends. Can be used with Radium PCV/Fuel hose. -6AN is for 3/8" hose-8AN is for 1/2" hose-10AN is for 5/8" hose-12AN is for 3/4" hose NOTES:-Hose clamps are NOT... MSRP: $9.95 - $29.95 Was: Now: $9.45 - $28.45 Choose Options
[PN: 20-0850] Radium Fuel Level Sender Adapter, FA20 2014+ FA20F VEHICLES ONLY20-0850 FUEL LEVEL SENDER ADAPTER, FA20Subaru FA20F vehicles use a returnless fuel system. And because the OEM fuel unit is different, the fuel level float is unique as well... MSRP: $24.95 Was: Now: $23.70 Add to Cart
Radium Fuel Level Switch and Diagnostic Indicator Click here to download installation instructions (PDF) This switch is only compatible with the Radium Multi-Pump Fuel Surge Tanks (MPFST) and the Radium Fuel Cell Surge MSRP: $29.95 - $109.95 Was: Now: $28.45 - $104.45 Choose Options
Radium Fuel Level Senders and Accessories * RAD DAN SUPRA ITEM * Click here to download installation instructions (PDF) MSRP: $99.95 Was: Now: $94.95 Choose Options
