[PN: 12-11500-S2] DIY Wiring Harness - Stage 2

Dual Stage Nitrous System, Transbrake Interrupt, Purge Kit, Remote Bottle Opener, Bottle Heater, Heater Pressure Switch, Fuel Pressure Safety Switch, Dedicated Fuel System, Timing Output, & WinMax Nitrous Controller

Harness Routing Instructions
Detailed Colored Wiring Diagram
Deutsch Connectors
High Quality Molex Terminals
Covered Fuse Box with LED Illumination
Bueler 40/60 Amp Relays
Protective Expandable Wiring Loom
Automotive Coper Core Wire with Protective Silicone Coating
 
The Nitrous Outlet Universal DIY professional wiring harness is designed to work in conjunction with the Nitrous Outlet WinMax controller and is the perfect option to simplifying the wiring process associated with nitrous installations.
 
The most time consuming and complicated part of the wiring process is eliminated with the detailed instructions, colored wiring schematics, pin out sheet, and universally mounted pre wired relay pack with fuse panel. 

Step 1: Determine location and mount the Relay pack and fuse panel.
Step 2: Mount the Switch Panel.
Step 3: Route the wiring to the system components.
Step 4: Cut the wire to length
Step 5: Cover the wire with the protective expandable wiring loom.
Step 6: Terminate the wiring ends and connect to the system components.
Step 7: Connect Harness Power, Ground, Keyed hot, tach signal, and TPS signal or WOT switch.