[PN: 20-0585] Radium Fuel Filter Kit, Nissan

COMPATIBILITY: FUEL FILTER KIT

Nissan S13 Silvia (All models/trims/RHD/LHD)
Nissan S13 180SX (All models/trims/RHD/LHD)
Nissan S13 200SX (All models/trims/RHD/LHD)
Nissan S13 240SX (All models/trims/RHD/LHD)
Nissan S14 Silvia (All models/trims/RHD/LHD)
Nissan S14 200SX (All models/trims/RHD/LHD)
Nissan S14 240SX (All models/trims/RHD/LHD)
Nissan S15 Silvia (All models/trims/RHD/LHD)
Nissan S15 200SX (All models/trims/RHD/LHD)
Nissan R32 Skyline (All models/trims/RHD/LHD)
Nissan R33 Skyline (All models/trims/RHD/LHD)
Nissan R34 Skyline (All models/trims/RHD/LHD)
Nissan S12 Silvia (All models/trims/RHD/LHD)
Nissan S12 180ZX (All models/trims/RHD/LHD)
Nissan S12 190SX (All models/trims/RHD/LHD)
Nissan S12 200SX (All models/trims/RHD/LHD)
Nissan S12 Gazelle (All models/trims/RHD/LHD)
Nissan S130 280ZX (All models/trims/RHD/LHD)

The factory Nissan fuel filter is plumbed between the fuel pump and the fuel rail. This Radium Engineering kit is an OEM fuel filter replacement (Nissan S13 shown below).

The Radium kit installs in less than an hour. No cutting or drilling is required. A couple of wrenches is all that is required.

Because the Radium filter is less restrictive than the OEM Nissan filter, there is less stress put on the fuel pump. Lower pre filter pressures permit less current draw and thus lower fuel temperatures. This phenomenon permits an increase in fuel flow. Nissan S15 shown above and Nissan R32 shown below.

The filters can withstand alternate fuels such as methanol, ethanol, E85, etc. For more information, go HERE.

INCLUDED
-Selectable Fuel Filter Element
-Anodized Aluminum Filter Housing
-Anodized Aluminum 2-Piece Clamp
-Anodized Aluminum Fittings
-Large 6AN Rubber Fuel Hose
-Stainless Steel Hardware

NOTE: An extra 90 degree PushLok hose end is provided for aftermarket fuel rail applications that have a 6AN male inlet fitting.