[PN: TS-0625-2052] Turbosmart IWG75 Garrett GT22 5 PSI Black

Installation guide

Turbosmart Upgraded Wastegate Actuators have been developed to provide the maximum possible boost response for your factory frame turbocharger. The Turbosmart IWG75 Series of upgraded Actuators benefit from an increased ‘Working Ratio’ over the factory equipment, resulting in improved boost response throughout the RPM range.

This improved ‘working ratio’ is achieved through an increase in the effective surface area of the diaphragm and revisions to the actual springs fitted, resulting in greater leverage of the forces the actuator is working against (boost and backpressure) while still being super-responsive. 

Upgrading with the same base pressure as the factory, you can expect a broader boost and torque curve through peak boost achieved earlier in the RPM and holding longer into higher RPM. These improvements can be amplified with higher base pressures, however tuning and recalibration is likely required.

Features
Proprietary Silicon Nomex Diaphragm
Choice of Springs from 3psi to 26psi (Optional)
High-Grade Billet Aluminum Construction
Stainless Steel Rods and Clevis
Turbosmart Unique Locking Collar System

 

SPRINGS

TS-0505-2001 Gen4 IWG75 Spring 3psi Inner – Brown / Black

TS-0505-2002 Gen4 IWG75 Spring 5psi Inner – Brown/ Grey

TS-0505-2003 Gen4 IWG74 Spring 7psi Middle – Brown / Purple

TS-0505-2004 Gen4 IWG75 Spring 11psi Middle – Brown / Red

TS-0505-2005 Gen4 IWG75 Spring 10psi Outer – Brown / Blue

TS-0505-2006 Gen4 IWG75 Spring 7psi Outer – Brown/ Pink

 

 

ACCESSORIES
TS-0505-2008 1/16” NPT to -3AN Male to Male Adaptor
TS-0505-2009 1/16” NPT to -4AN Male to Male Adaptor
TS-0505-2007 1/16” NPT to 1/8” NPT Male to Female Adaptor

TOOLS
TS-0505-3008 Gen4 IWG75 Locking Collar Tool