Sale RAD Industries Coolant AN Adapter (Multi-Purpose Application for Head OR Water Pump) MSRP: Was: $36.00 Now: $30.60 Choose Options
Sale RAD Industries Handbrake w/Master Cylinder Options MSRP: Was: $299.00 Now: $224.25 Choose Options
Sale V1 RAD Industries 2JZ Billet Water Inlet Alternator Bracket MSRP: Was: $420.00 Now: $320.00 Choose Options
Sale Hardware Kit for RAD Industries Billet Intake Manifold Adapter MSRP: Was: $29.00 Now: $24.65 Add to Cart
OPEN: RAD Industries AN Adapter for JZ Rear Coolant Exit MSRP: $65.00 Was: Now: $60.00 Choose Options
Sale RAD Industries Turbo Oil Drain Flange w/-10 Female Fitting MSRP: Was: $40.00 Now: $34.00 Choose Options
Sale RAD Industries Turbo Oil Drain Flange w/-10 Male Fitting MSRP: Was: $40.00 Now: $34.00 Choose Options
Sale RAD Industries Remote External Pressure Relief Valve MSRP: Was: $265.00 Now: $225.25 Add to Cart
Sale RAD Industries 2JZ Billet Water Inlet Alternator Bracket MSRP: Was: $420.00 Now: $357.00 Choose Options
Sale RAD Industries Billet Timing Belt Tensioner Bracket MSRP: Was: $235.00 Now: $199.75 Choose Options
Sale RAD Industries 2JZ Billet Bracket for KRC Power Steering Pump MSRP: Was: $169.00 Now: $143.65 Choose Options
Sale RAD Industries GTE Billet Upper Water Neck *Race Version MSRP: Was: $340.00 Now: $289.00 Choose Options
Sale RAD Industries Recirculation Pipe for Upper Water Neck MSRP: Was: $36.00 Now: $30.60 Choose Options
Sale RAD Industries Billet Roll Cage Clamps * RAD DAN SUPRA ITEM * Billet Clamp, Master Button Cutoff is designed to hold Part Number 87941 Billet Clamp Cable Pull Cutoff is designed to hold: • Nitrous Supply Cutoff (Part Number 26500) • Fire Suppression Pull Cable These clamps... MSRP: Was: $75.00 Now: $63.75 Choose Options
Sale RAD Industries AN Adapter for JZ Rear Coolant Exit This part converts the rear coolant port on all JZ engines to an AN fitting adapter. The threads are -8 ORB for your convenience. It was designed so you don't have to remove the head to drill and tap the head in order to convert to an AN fitting... MSRP: Was: $65.00 Now: $55.25 Choose Options
Sale RAD Industries 2JZ-GE Billet Upper Water Neck This RAD Industries Billet Upper Water Neck is for the 2JZ-GE head and will allow you to adapt to AN fittings on your GE engine. It has -16 ORB female threads so you can use a union fitting for either -16 or -20 for your upper radiator hose. ... MSRP: Was: $370.00 Now: $314.50 Choose Options
Sale RAD Industries Coolant AN Adapter (Multi-Purpose Application for Head OR Water Pump) This RAD Industries adapter was designed for the 2JZ-GE head so you can adapt the exhaust side coolant port to AN fittings for ease of plumbing on your build. This billet coolant adapter bolts directly to the head using an o-ring to seal to the mating... MSRP: Was: $36.00 Now: $30.60 Choose Options
Sale RAD Industries Handbrake w/Master Cylinder Options * RAD DAN SUPRA ITEM * DESIGNED BY A DRIVER FOR THE DRIVER! This handbrake has been a long time coming, we took our time in designing it to be just right for you guys. Handbrakes are signature to drifting, if you are looking for a handbrake that... MSRP: Was: $299.00 Now: $224.25 Choose Options
Sale V1 RAD Industries 2JZ Billet Water Inlet Alternator Bracket * RAD DAN SUPRA ITEM * Rad Dan has spent a year personally perfecting the design of this innovative multipurpose CNC Billet Aluminum Water Inlet and Alternator Bracket that is currently ran on his Formula Drift Competition MKIV Supra! *Must have an... MSRP: Was: $420.00 Now: $320.00 Choose Options
Sale RAD Industries Alternator Brace * RAD DAN SUPRA ITEM * This alternator brace was designed to prevent the ear on the block taking all the side load and possibly breaking. 2JZ engines are 25-30 years old at this point and there is the possibility of the Alternator ear cracking, this... MSRP: Was: $39.95 Now: $33.96 Add to Cart
Sale Hardware Kit for RAD Industries Billet Intake Manifold Adapter HARDWARE PACKET for RAD Industries Billet Intake Manifold Adapter Includes: M6 hardware M8 hardware O-Rings MSRP: Was: $29.00 Now: $24.65 Add to Cart
RAD Industries 2JZ-GE 2JZ-GTE 1JZ-GTE Billet Main Cap Set *BUNDLE Pricing (offered above) with ARP Main Stud Kit 203-5405 will save you $87* Introducing the all new RAD Industries billet main cap for 2JZ in collaboration with Billet Speed Works. These billet main caps are put to the test in Rad Dan's Formula... MSRP: Was: Now: $599.00 Choose Options
OPEN: RAD Industries AN Adapter for JZ Rear Coolant Exit This is in ANODIZED BLACK ONLY. The anodizing tolerance was done too thick, so we had to chase the threads so that the part would function properly. The parts sustained some cosmetic damage to the threads but once installed look and function normal. Due... MSRP: $65.00 Was: Now: $60.00 Choose Options
Sale RAD Industries Turbo Oil Drain Flange w/-10 Female Fitting The RAD Industries Billet Turbo Oil Drain Flange for a 2JZ and 1JZ oil pan. This is a beautiful billet part that enhances the look of your engine as well as simplifying function for a single turbo setup. Has an ORB -10 female so you can... MSRP: Was: $40.00 Now: $34.00 Choose Options
Sale RAD Industries Turbo Oil Drain Flange w/-10 Male Fitting The RAD Industries Billet Turbo Oil Drain Flange for a 2JZ and 1JZ oil pan. This is a beautiful billet part that enhances the look of your engine as well as simplifying function for a single turbo setup. It has a -10 AN male and bolts directly up to the... MSRP: Was: $40.00 Now: $34.00 Choose Options
Sale RAD Industries Oil Level Block Off The RAD Industries Billet Oil Level Block Off for a 2JZ/1JZ oil pan. Works on all 2JZ/1JZ GTE and GE oil pans. This part is designed to block off the oil level sending unit for those of you that are simplifying your engine bay and/or building... MSRP: Was: $36.00 Now: $30.60 Choose Options
Sale RAD Industries Cam Sensor Delete The RAD Industries Billet Cam Sensor Delete for 2JZ/1JZ Non-VVTI-GTE Heads fits both 2JZ GTE and 1JZ GTE heads where you need to block off one of the cam sensors after going to an aftermarket ECU that only uses one cam sensor. Comes with hardware... MSRP: Was: $42.00 Now: $35.70 Choose Options
Sale RAD Industries Remote External Pressure Relief Valve This Remote External Pressure Relief Valve is intended to protect your power steering pump by utilizing a lower relief pressure than the factory internal pressure relief valve of your pump. You will need to set the pressure of your Remote External... MSRP: Was: $265.00 Now: $225.25 Add to Cart
[PN: 406302] Alternator Belt 30.2 inch (single) This 30.2" belt will work with the RAD Industries Water Inlet Alternator Bracket on a 2JZ/1JZ with standard size crank pulley and a 2.75" oversized alternator pulley MSRP: Was: Now: $28.00 Add to Cart
[PN: A305K6] Alternator Belt 30.5 inch (single) This 30.5" belt will work with the RAD Industries Water Inlet Alternator Bracket on a 2JZ/1JZ with standard size crank pulley and a 2.75" oversized alternator pulley MSRP: Was: Now: $28.00 Add to Cart
Sale RAD Industries Billet Rear Upper Control Arms The RAD Industries Billet upper control arms for MK4 Supra were designed to be the best upper control arm on the market period. Not only do they look amazing but they also have the features needed to function the best as well. We made them... MSRP: Was: $1,550.00 Now: $1,317.50 Add to Cart
Sale RAD Industries Billet MK4 Radiator Mounts These billet brackets replace your OEM brackets and add a custom look and detail to your engine bay. The billet brackets utilize your OEM mounting holes and will work with a factory radiator or aftermarket radiator. They do require you to remove the... MSRP: Was: $79.95 Now: $67.96 - $99.95 Choose Options
Sale RAD x BOSCH Power Steering Kit This RAD Industries, BOSCH Motorsports power steering kit is kept in stock and ready to ship for your convenience. We offer this kit to add variety between BOSCH and KRC pumps of your choice. If you are interested in our RAD Industries, KRC power... MSRP: Was: $999.99 Now: $849.99 Choose Options
Sale RAD Industries Billet Lower Water Neck RAD Industries billet 2JZ-GTE + 1JZ-GTE Lower Water Neck with -16 orb port as well as barb for OEM/silicone hose if desired. This lower water neck bolts to the OEM water pump, it eliminates the need to buy a lower water neck rotator adapter. This is a... MSRP: Was: $270.00 Now: $229.50 Choose Options
Sale RAD Industries 2JZ Billet Water Inlet Alternator Bracket * RAD DAN SUPRA ITEM * We have developed a Version 2 for the Water Inlet Alternator Bracket. Our V2 of the Water Inlet Alternator Bracket has some added material in two areas to help minimize deflection under load. Otherwise its the same... MSRP: Was: $420.00 Now: $357.00 Choose Options
Sale RAD Industries Billet Timing Belt Tensioner Bracket Introducing the RAD Industries Billet Timing belt tensioner bracket. It is made in the USA of 6061 billet aluminum. This bracket is stronger in every way in compassion to the OEM cast aluminum tensioner bracket, It's thicker in a few key... MSRP: Was: $235.00 Now: $199.75 Choose Options
Sale RAD Industries GTE Billet Upper Water Neck * RAD DAN SUPRA ITEM * The RAD Industries billet 2JZ-GTE + 1JZ-GTE Upper water neck with -16 orb port. This billet water neck not only looks amazing and cleans up your engine bay it also offers the end user a choice to run it with OEM water pump... MSRP: Was: $370.00 Now: $314.50 Choose Options
Sale RAD Industries 2JZ Billet Bracket for KRC Power Steering Pump * RAD DAN SUPRA ITEM * Serpentine Belt can be purchased separately HERE. The RAD Industries billet KRC Pump Bracket is designed for a race motor application only. This bracket will allow you to bolt KRC power steering pump models of your choice to your... MSRP: Was: $169.00 Now: $143.65 Choose Options
Sale RAD Industries Billet Intake Manifold Adapter This is a Billet adapter plate to mate a 2JZ-GE lower intake manifold to 2JZ-GTE upper intake manifold. If you are building a NA-T setup on a 2JZ-GE engine and would like to simplify the look by eliminating the OEM intake manifold that crosses up and... MSRP: Was: $249.00 Now: $211.65 Choose Options
Sale RAD Industries GTE Billet Upper Water Neck *Race Version * RAD DAN SUPRA ITEM * The RAD Industries billet 2JZ-GTE + 1JZ-GTE RACE VERSION Upper water neck with -16 orb port. This product was designed with simplicity in mind while still maintaining the clean machined billet look in your engine bay... MSRP: Was: $340.00 Now: $289.00 Choose Options
Sale RAD Industries 2JZ Billet Torque Plate This part is ideal for a machine shop or someone that is building multiple 2JZ's. If you would like to reassure your personal build is done properly, this is a great tool to bring to your machinist or builder as well. When building an engine the machine... MSRP: Was: $450.00 Now: $382.50 Add to Cart
SAMSONAS J3 Adapter Plate CLICK HERE for SAMSONAS H-Pattern CLICK HERE for SAMSONAS Sequential CLICK HERE for SAMSONAS Sequential RS90 For the following applications: -Samsonas sequential OR h-pattern gearbox to JZ engine using J3 A340 automatic bellhousing.-Customer needs... MSRP: Was: Now: $615.00 Add to Cart
Sale RAD Industries Recirculation Pipe for Upper Water Neck In order to use our upper water neck with the below 1JZ/2JZ head and block applications, we offer the billet water pipe in the required lengths. Offered in all necesary lengths for JZ applications WHILE USING RAD Industries Billet Upper Water Neck... MSRP: Was: $36.00 Now: $30.60 Choose Options
