ENGINE

[PN: 12-11000-S2] X-Series Plug and Play Wiring Harness - Stage 2

Installation Guide: X-Series Plug and Play Wiring Harness - Stage 2 (SKU: 12-11000-S2) System, Purge, Heater & WOT Switch Harness Harness Routing Instructions Detailed Colored Wiring Diagram WOT Switch Activation Custom Switch Panel Pre-terminated...

[PN: 12-11000-S1] X-Series Plug and Play Wiring Harness - Stage 1

Installation Guide: X-Series Plug and Play Wiring Harness - Stage 1 (SKU: 12-11000-S1) System, Purge, & WOT Switch HarnessHarness Routing Instructions Detailed Colored Wiring Diagram WOT Switch Activation Custom Switch Panel Pre-terminated Deutsch...

[PN: 00-61001] WinMax TPS and RPM Activated Nitrous Window Switch

Installation Guide: Nitrous Outlet WinMax Instructions (SKU: 00-61001) Nitrous Outlet Window Switch Instructions   Small, Compact, and User Friendly 2 Trigger Outputs for External Timing Retard Unit Clear & Easy To Read Display Live RPM and TPS...

[PN: 00-10670] Stinger 2 Dry 4150 Nitrous Plate System

Nitrous Outlet offers a variety of options for your carbureted vehicle set-up. All of our carbureted nitrous plates offer superior distribution and consistent performance every time. Years of research and development have been been poured into our...

[PN: 101-0010] Link ECU Old G4 Atom & Lightning 5m (5LT)

DETAILS: 5 m, to suit obsolete G4 Atom and Lightning only. Does NOT fit G4+ Atom  

[PN: 101-0009] Link ECU B Loom Long (5LB)

DETAILS: 5 m long 'B' loom to suit G4, G4+ and G4X ECUsPerfect for all custom wiring jobs utilising Link WireIn ECUs. The ‘B’ Loom has a Link ‘B’ ECU connector at one end and unterminated wires at the other. All wires are colour...

[PN: 101-0008] Link ECU A Loom Long (5LA)

DETAILS: 5 m long 'A' loom to suit G4, G4+ and G4X ECUsPerfect for all custom wiring jobs utilising Link WireIn ECUs. The ‘A’ Loom has a Link ‘A’ ECU connector at one end and unterminated wires at the other. All wires are colour...

[PN: 101-0006] Link ECU B Loom Medium (2LB)

DETAILS: 2.5 m long 'B' loom to suit G4, G4+ and G4X ECUsPerfect for all custom wiring jobs utilising Link WireIn ECUs. The ‘B’ Loom has a Link ‘B’ ECU connector at one end and unterminated wires at the other. All wires are colour...

[PN: 101-0005] Link ECU A Loom Medium (2LA)

DETAILS: 2.5 m long 'A' loom to suit G4, G4+ and G4X ECUsPerfect for all custom wiring jobs utilising Link WireIn ECUs. The ‘A’ Loom has a Link ‘A’ ECU connector at one end and unterminated wires at the other. All wires are colour...

[PN: 101-0003] Link ECU B Loom Short (0LB)

DETAILS: 0.4m long 'B' loom to suit G4, G4+ and G4X Wire-In ECUsPerfect for all custom wiring jobs utilising Link WireIn ECUs. The ‘B’ Loom has a Link ‘B’ ECU connector at one end and unterminated wires at the other. All wires are...

[PN: 101-0194] Link ECU Electronic Throttle Body Kit - 74mm (ETB74)

DETAILS: 74mm Electronic Throttle Body 74mm Bore size Dual potentiometer redundancy Bosch quality and performance Includes groove on inlet port flange Includes mating connector kit Technical Specs:See attached image. Further details on...

[PN: 101-0190] Link ECU Electronic Throttle Body Kit - 82mm (ETB82)

DETAILS: 82mm Electronic Throttle Body 82mm Bore size Dual potentiometer redundancy Bosch quality and performance Includes groove on inlet port flange Includes mating connector kit Technical Specs:See attached image. Further details on...

[PN: 101-0188] Link ECU E-Throttle Accelerator Pedal Module (PED)

DETAILS: E-Throttle Accelerator Pedal Module Firewall mounted hanging design 16degree (~70mm) travel Redundant dual output potentiometers suitable for use with Electronic throttle bodies Includes 6 pin mating connector kit Technical...

[PN: 109-9000B] Link ECU G4X XtremeX ECU + Terminated LS Engine Harness Drive-by-Wire Bundle

Harness Manual Online Instruction Manual   The quickest, easiest, tidiest and most cost effective way to connect a Link ECU to your Drive-by-Wire/E-Throttle LS V8 engine.  Bundle Includes: G4X XtremeX ECU (8 x Injector and 8 x Ignition Drives)...

[PN: 108-9000B] Link ECU G4X StormX ECU + Terminated LS Engine Harness Drive-by-Cable Bundle

Harness Manual Online Instruction Manual   DETAILS: The quickest, easiest, tidiest and most cost effective way to connect a Link ECU to your Drive-by-Cable LS V8 engine.  Bundle Includes: G4X StormX ECU (8 x Injector and 8 x...

[PN: 101-0307] Link ECU LS Gen 3 to Gen 4 Cam Sensor Conversion Harness

DETAILS: Adapter harness to run the Gen 4 front mounted under water pump Cam Sensor on the Gen 3 LS Engine.    

[PN: 101-0306] Link ECU LS Gen 4 Knock Adapter Loom

DETAILS: Intended for use with our terminated LS engine harness. Plug and play compatibility with Gen 4 Knock Sensors in factory location.       

[PN: 101-0305] Link ECU LS Gen 3 Knock Adapter Loom

DETAILS: •    Intended for use with our terminated LS engine harness. Plug and play compatibility with factory Gen 3 Knock Sensor loom (located in the valley).     

[PN: 101-0304] Link ECU LS DBW Adapter Loom

DETAILS: •    Intended for use with our terminated LS engine harness. Plug and play compatibility for Gen 4 LS DBW throttle bodies.  •    This adapter loom terminates to Aux 9/10, 5v reference,...

[PN: 101-0302] Link ESU LS Map Adapter Harness

DETAILS: •    Intended for use with our terminated LS engine harness. Plug and play compatibility for Gen 3 LS map sensors

[PN: 101-0301] Link ESU LS Stepper Adapter Harness

DETAILS: •    Intended for use with our terminated LS engine harness. Plug and play compatibility with GM LS IAC stepper motors. If you are planning to run a drive by cable configuration on our terminated LS harness you will need...

[PN: 101-0015] Link ECU Boost Control Solenoid - 3 Port (3BCS)

DETAILS: More boost? Of course and this 3 port boost control solenoid will help you do it. 3 port boost control solenoids are the go-to for the majority of boost control applications, they allow for precise control of boost and boost levels can be...

[PN: 125-1000] Link ECU CAN Lambda (CANLAM)

Download the CAN-Lambda QuickStart Guide Download the CAN-Lambda manual DETAILS: Link’s CAN Lambda is an easy to use CAN module that provides digital wideband sensor control via CAN bus and is compatible with leading aftermarket ECUs.If using the...

[PN: 100-0170] Link ECU AIM GPS09 Module for AIM Dashes

DETAILS: Add-on GPS module for the MXS and MXG Strada Dashes. 1.3m cable length.FEATURES: Sample lap and split times as well as speed, position and acceleration - all the information needed for engine tuning as well as for improving your driving...

[PN: 100-0168] Link ECU LINK MXS Strada 5" Dash - Street Edition

  DETAILS: Link MXS Strada 5” dash, powered by AIM.The Link MXS Strada Street edition is a full colour, 5-inch dash display legal for road use featuring 10 RGB shift lights and street icons down the side of the dash. It is pre-configured to...

[PN: 101-0127] Link ECU LSU 4.9 Plug Kit (PKLSU)

[PN: 101-0276] Link ECU CAN Keypad Insert - Arrow

[PN: 101-0234] Link ECU Link CAN Keypad 4 button

  DETAILS: Rugged 4 key CAN Keypad with interchangeable 15mm inserts (sold separately).Custom button inserts and configurable RGB indicator rings per button allow for extremely flexible set-ups.The keypad is designed for ultimate reliability -...

[PN: 101-0020] Link ECU Plug (CANF)

Field Installable CAN Plug - Can be used to wire in to the 6 pin CAN port on Link G4/G4+/G4X ECUs that have a round 6 pin CAN communication port. Requires soldering for assembly. Also see 101-0211, CANLTW - CAN Connection Cable for WireIn ECU’s...

[PN:101-0002] Link ECU A Loom short (0LA)

DETAILS: 0.4m long 'A' loom to suit G4, G4+ and G4X Wire-In ECUsPerfect for all custom wiring jobs utilising Link WireIn ECUs. The ‘A’ Loom has a Link ‘A’ ECU connector at one end and unterminated wires at the other. All wires are...

[PN: 115-1000] Link ECU E-throttle (RET)

Wiring Diagram (Example) DETAILS: Link's external E-throttle (Drive by Wire) module works with Link's G4X ECUs (except the entry level AtomX), plus G4+ ECUs (Storm and above) to give you full control of your throttle setup, allowing a faster more...

[PN: 101-0300] Link ECUTerminated Engine Harness GM LS GEN3/4

Manuals Online Instruction Manual   DETAILS: Terminated Engine Harness to cover a wide range of GM LS Engine Variations. Please note that due to the large number of Engines supported it may require user modification for some applications, see...

[PN: 20-1020] Radium Fuel Pump Hanger, 89-05 Mazda MX-5

Click here to download installation instructions (PDF) VEHICLE COMPATIBILITY89-05 Mazda MX-5 Miata OVERVIEWThis fuel hanger completely replaces the factory in-tank fuel pump module and allows 1 or 2 aftermarket pumps to be used. The OEM fuel level...

Radium Fuel Delivery System, Cadillac CTS-V

KIT INCLUDES: Pump Hanger Select One 20-1320 Fuel Hanger, 08-17 GM, AEM 50-1220, DW440 - ($569.95) 20-1322 Fuel Hanger, 08-17 GM, Walbro F90000267/274/285 - ($617.45) Plumbing Kit Select One 20-1325-03 Fuel Hanger Plumbing Kit, Cadillac...

[PN: 20-132] Radium Fuel Pump Hanger, 08-17 GM

Click here to download installation instructions (PDF) VEHICLE COMPATIBILITY08-14 Cadillac CTS08-15 Cadillac CTS-V10-15 Chevrolet Camaro09-17 Chevrolet Caprice PPV14-17 Chevrolet SS08-09 Chevrolet Omega08-09 Holden Commodore VE14-17 Holden...

[PN: 20-079] Radium Fuel Pump Hanger, 94-01 Acura Integra, 92-00 Honda Civic

Click here to download installation instructions (PDF) Click here to watch an independent installation video.FUEL PUMP HANGERCOMPATIBILITY94-01 Acura Integra (All models/trims/RHD/LHD)92-00 Honda Civic (All models/trims/RHD/LHD) OVERVIEWThis...