[PN: 8065PCBKRADDAN] Rad Dan Manga Designed Juic’d BOX 50” 7 Drawer Powered Cart MSRP: $2,800.00 Was: Now: $2,700.00 Add to Cart
[PN: 8056FDBKRADDAN] BLACK Rad Dan Manga Designed Black Premium Full 6 Drawer Service Cart MSRP: $1,800.00 Was: Now: $1,700.00 Add to Cart
RAD Industries Coolant AN Adapter (Multi-Purpose Application for Head OR Water Pump) MSRP: Was: Now: $36.00 Choose Options
[PN: 8056FDBLRADDAN] BLUE Rad Dan Manga Designed Black Premium Full 6 Drawer Service Cart MSRP: $1,800.00 Was: Now: $1,700.00 Add to Cart
OPEN: RAD Industries GTE Billet Upper Water Neck *Race Version MSRP: $340.00 Was: Now: $275.00 Out of stock
[PN: 8065PCBKRADDAN] Rad Dan Manga Designed Juic’d BOX 50” 7 Drawer Powered Cart Rad Dan Design – Inspired by Rad Dan’s signature style, the MKIV Toyota Supra, and manga aesthetics, this cart fuses Japanese performance heritage with graphic edge—sharp lines, drift-racing... MSRP: $2,800.00 Was: Now: $2,700.00 Add to Cart
[PN: 8056FDBKRADDAN] BLACK Rad Dan Manga Designed Black Premium Full 6 Drawer Service Cart BLACK Base Rad Dan Design – Inspired by Rad Dan’s signature style, the MKIV Toyota Supra, and manga aesthetics, this cart fuses Japanese performance heritage with graphic edge—sharp lines,... MSRP: $1,800.00 Was: Now: $1,700.00 Add to Cart
RAD Industries Billet Roll Cage Clamps * RAD DAN SUPRA ITEM * Billet Clamp, Master Button Cutoff is designed to hold Part Number 87941(click here to purchase button without clamps) Billet Clamp Cable Pull Cu MSRP: Was: Now: $75.00 Choose Options
RAD Industries AN Adapter for JZ Rear Coolant Exit This part converts the rear coolant port on all JZ engines to an AN fitting adapter. The threads are -8 ORB for your convenience. It was designed so you don't have to remove the head to drill and... MSRP: Was: Now: $65.00 Choose Options
RAD Industries 2JZ-GE Billet Upper Water Neck This RAD Industries Billet Upper Water Neck is for the 2JZ-GE head and will allow you to adapt to AN fittings on your GE engine. It has -16 ORB female threads so you can use a union fitting for... MSRP: Was: Now: $370.00 Choose Options
RAD Industries Coolant AN Adapter (Multi-Purpose Application for Head OR Water Pump) This RAD Industries adapter was designed for the 2JZ-GE head so you can adapt the exhaust side coolant port to AN fittings for ease of plumbing on your build. This billet coolant adapter bolts... MSRP: Was: Now: $36.00 Choose Options
RAD Industries/Rywire MKIV Supra Mil-Spec Engine Harness RAD Industries X Rywire MKIV Engine Harness The goal with this harness was to clean up your engine bay with race car grade wiring and at the same time, modernizing your engine harness to accomodate... MSRP: Was: Now: $2,800.00 Choose Options
[PN: 8056FDBLRADDAN] BLUE Rad Dan Manga Designed Black Premium Full 6 Drawer Service Cart BLUE Base Rad Dan Design – Inspired by Rad Dan’s signature style, the MKIV Toyota Supra, and manga aesthetics, this cart fuses Japanese performance heritage with graphic edge—sharp lines,... MSRP: $1,800.00 Was: Now: $1,700.00 Add to Cart
V1 RAD Industries 2JZ Billet Water Inlet Alternator Bracket * RAD DAN SUPRA ITEM * Rad Dan has spent a year personally perfecting the design of this innovative multipurpose CNC Billet Aluminum Water Inlet and Alternator Bracket that is currently ran on his... MSRP: Was: Now: $360.00 Choose Options
2.25" OEM Sized Billet Alternator Pulley This 2.25" Alternator Pulley is the same size as an OEM Alternator Pulley but comes in billet, anodized black. Utilizes a 17mm ID hole, this pulley will work on the RAD-160 , RAD-270 and all OEM... MSRP: Was: Now: $52.00 Add to Cart
RAD-270 Self Exciting 270amp Alternator * RAD DAN SUPRA ITEM * "I have ran a variety of different alternators due to ongoing issues. With development over the years , I am happy to make this reliable alternator available to RAD Industries... MSRP: Was: Now: $815.00 Choose Options
RAD Industries Alternator Brace * RAD DAN SUPRA ITEM * This alternator brace was designed to prevent the ear on the block taking all the side load and possibly breaking. 2JZ engines are 25-30 years old at this point and there is... MSRP: Was: Now: $39.95 Add to Cart
RAD Industries 2JZ Carbon Race Covers * RAD DAN SUPRA ITEM * We have produced these Carbon Fiber Race timing covers to eliminate the large hole where the accessory belt tensioner used to be. This keeps all unwanted debris out of the... MSRP: Was: Now: $850.00 Choose Options
Hardware Kit for RAD Industries Billet Intake Manifold Adapter HARDWARE PACKET for RAD Industries Billet Intake Manifold Adapter Includes: M6 hardware M8 hardware O-Rings MSRP: Was: Now: $29.00 Add to Cart
RAD Industries 2JZ-GE 2JZ-GTE 1JZ-GTE Billet Main Cap Set *BUNDLE Pricing (offered above) with ARP Main Stud Kit 203-5405 will save you $87* Introducing the all new RAD Industries billet main cap for 2JZ in collaboration with Billet Speed Works. These... MSRP: Was: Now: $599.00 Choose Options
OPEN: RAD Industries GTE Billet Upper Water Neck *Race Version USED... This part sustained some scuffs and small dings during use but in perfect functional condition. We are offering it at a discounted price. Actual part may differ from photos, several for sale... MSRP: $340.00 Was: Now: $275.00 Out of stock
RAD Industries Turbo Oil Drain Flange w/-10 Male Fitting The RAD Industries Billet Turbo Oil Drain Flange for a 2JZ and 1JZ oil pan. This is a beautiful billet part that enhances the look of your engine as well as simplifying function for a single turbo... MSRP: Was: Now: $40.00 Choose Options
RAD Industries Oil Level Block Off The RAD Industries Billet Oil Level Block Off for a 2JZ/1JZ oil pan. Works on all 2JZ/1JZ GTE and GE oil pans. This part is designed to block off the oil level sending unit for those of you that... MSRP: Was: Now: $36.00 Choose Options
RAD Industries Cam Sensor Delete The RAD Industries Billet Cam Sensor Delete for 2JZ/1JZ Non-VVTI-GTE Heads fits both 2JZ GTE and 1JZ GTE heads where you need to block off one of the cam sensors after going to an aftermarket ECU... MSRP: Was: Now: $42.00 Choose Options
RAD Industries Remote External Pressure Relief Valve This Remote External Pressure Relief Valve is intended to protect your power steering pump by utilizing a lower relief pressure than the factory internal pressure relief valve of your pump. You will... MSRP: Was: Now: $265.00 Add to Cart
[PN: 4060302] Alternator Belt 30.2 inch (single) This 30.2" belt will work with the RAD Industries Water Inlet Alternator Bracket on a 2JZ/1JZ with standard size crank pulley and a 2.75" oversized alternator pulley MSRP: Was: Now: $34.00 Add to Cart
[PN: A305K6] Alternator Belt 30.5 inch (single) This 30.5" belt will work with the RAD Industries Water Inlet Alternator Bracket on a 2JZ/1JZ with standard size crank pulley and a 2.75" oversized alternator pulley MSRP: Was: Now: $28.00 Add to Cart
RAD Industries Billet Rear Upper Control Arms The RAD Industries Billet upper control arms for MK4 Supra were designed to be the best upper control arm on the market period. Not only do they look amazing but they also have the features needed... MSRP: Was: Now: $1,550.00 Add to Cart
RAD Industries Billet MK4 Radiator Mounts These billet brackets replace your OEM brackets and add a custom look and detail to your engine bay. The billet brackets utilize your OEM mounting holes and will work with a factory radiator or... MSRP: Was: Now: $79.95 - $99.95 Choose Options
RAD x BOSCH Power Steering Kit This RAD Industries, BOSCH Motorsports power steering kit is kept in stock and ready to ship for your convenience. We offer this kit to add variety between BOSCH and KRC pumps of your choice. If you... MSRP: Was: Now: $999.99 Choose Options
RAD Industries Billet Lower Water Neck RAD Industries billet 2JZ-GTE + 1JZ-GTE Lower Water Neck with -16 orb port as well as barb for OEM/silicone hose if desired. This lower water neck bolts to the OEM water pump, it eliminates the need... MSRP: Was: Now: $270.00 Choose Options
RAD Industries 2JZ Billet Water Inlet Alternator Bracket * RAD DAN SUPRA ITEM * We have developed a Version 2 for the Water Inlet Alternator Bracket. Our V2 of the Water Inlet Alternator Bracket has some added material in two areas to help minimize... MSRP: Was: Now: $420.00 Choose Options
RAD Industries Billet Timing Belt Tensioner Bracket Introducing the RAD Industries Billet Timing belt tensioner bracket. It is made in the USA of 6061 billet aluminum. This bracket is stronger in every way in compassion to the OEM cast aluminum... MSRP: Was: Now: $235.00 Choose Options
RAD-160 Self Exciting 160amp Alternator Belt Options for FLUIDAMPR: 406302 , A305K6 Belt Options for ATI Damper: MSRP: Was: Now: $664.00 Choose Options
RAD Industries GTE Billet Upper Water Neck * RAD DAN SUPRA ITEM * The RAD Industries billet 2JZ-GTE + 1JZ-GTE Upper water neck with -16 orb port. This billet water neck not only looks amazing and cleans up your engine bay it also offers the... MSRP: Was: Now: $370.00 Choose Options
RAD Industries 2JZ Billet Bracket for KRC Power Steering Pump * RAD DAN SUPRA ITEM * Serpentine Belt can be purchased separately HERE. The RAD Industries billet KRC Pump Bracket is designed for a race motor application only. This bracket will allow you to bolt... MSRP: Was: Now: $169.00 Choose Options
RAD Industries Billet Intake Manifold Adapter This is a Billet adapter plate to mate a 2JZ-GE lower intake manifold to 2JZ-GTE upper intake manifold. If you are building a NA-T setup on a 2JZ-GE engine and would like to simplify the look by... MSRP: Was: Now: $249.00 Choose Options
RAD Industries GTE Billet Upper Water Neck *Race Version * RAD DAN SUPRA ITEM * The RAD Industries billet 2JZ-GTE + 1JZ-GTE RACE VERSION Upper water neck with -16 orb port. This product was designed with simplicity in mind while still maintaining the clean... MSRP: Was: Now: $340.00 Choose Options
RAD x KRC Power Steering PRO Kit * RAD DAN SUPRA ITEM * Pro Series 3 (PS3) Pump with RAD-Ind 2JZ bracket (RAD_KRC_PSB) This kit is designed for the Pro driver or the guy building a serious level build that wants the best power... MSRP: Was: Now: $1,250.00 Choose Options
2.75" Oversized Billet Alternator Pulley * RAD DAN SUPRA ITEM * This 2.75" pulley was designed to prevent over-spinning of the alternator. This will allow you to rev your engine to 9000rpm with an OEM crank pulley with no issues or rev to... MSRP: Was: Now: $52.00 Add to Cart
Supra Race Doors JZA80 (Set of 2) * RAD DAN SUPRA ITEM * PLEASE CALL TO PLACE ORDER: (949) 873-4195 MSRP: Was: Now: $1,550.00
