*SALE*

[PN: 101-0033] Link ECU Dual Core Cable (C2C10)

DETAILS: Dual core screen cable for use with trigger signals and knock sensors - 10m per pack  

[PN 101-0001] Link ECU Tuning Cable (CUSB)

DETAILS: Link CAN to USB Tuning Cable. Used to connect the ECU to a computer via USB. A CAN to Serial cable is also available.  Compatible with: Link G4X Storm  Link G4X and G4+ Fury  Link G4X and G4+ Xtreme Link G4+ Thunder  All...

[PN: 101-0023] Link ECU Tuning Cable (CANSER)

DETAILS: Link CAN to Serial (DB9 Female connector) Tuning Cable. Used to connect ECU to a computer with a serial interface (DB9 Male). A USB tuning cable is also available.  Compatible with: Link G4X Storm  Link G4X and G4+ Fury  Link...

[PN: 101-0022] Link ECU Cable (CANPCB)

DETAILS: Required to add CAN/Serial communications to G4+/G4X Plugin ECU’s. Plugs directly into ECU PCB header. Use the Link CANF connector (purchased separately) to connect.         

[PN: 101-0106] Link ECU XS Expansion Loom (XSL)

DETAILS: Want to add additional inputs/output to your Link Plugin ECU? Use the XS Loom. The Link XS Loom plugs into the expansion connector on all Link G4, G4+ and G4X plug-in ECUs. The number of extra inputs and outputs added by the XS Loom is dependent...

[PN: 101-0010] Link ECU Old G4 Atom & Lightning 5m (5LT)

DETAILS: 5 m, to suit obsolete G4 Atom and Lightning only. Does NOT fit G4+ Atom  

[PN: 101-0009] Link ECU B Loom Long (5LB)

DETAILS: 5 m long 'B' loom to suit G4, G4+ and G4X ECUsPerfect for all custom wiring jobs utilising Link WireIn ECUs. The ‘B’ Loom has a Link ‘B’ ECU connector at one end and unterminated wires at the other. All wires are colour...

[PN: 101-0008] Link ECU A Loom Long (5LA)

DETAILS: 5 m long 'A' loom to suit G4, G4+ and G4X ECUsPerfect for all custom wiring jobs utilising Link WireIn ECUs. The ‘A’ Loom has a Link ‘A’ ECU connector at one end and unterminated wires at the other. All wires are colour...

[PN: 101-0006] Link ECU B Loom Medium (2LB)

DETAILS: 2.5 m long 'B' loom to suit G4, G4+ and G4X ECUsPerfect for all custom wiring jobs utilising Link WireIn ECUs. The ‘B’ Loom has a Link ‘B’ ECU connector at one end and unterminated wires at the other. All wires are colour...

[PN: 101-0005] Link ECU A Loom Medium (2LA)

DETAILS: 2.5 m long 'A' loom to suit G4, G4+ and G4X ECUsPerfect for all custom wiring jobs utilising Link WireIn ECUs. The ‘A’ Loom has a Link ‘A’ ECU connector at one end and unterminated wires at the other. All wires are colour...

[PN: 101-0003] Link ECU B Loom Short (0LB)

DETAILS: 0.4m long 'B' loom to suit G4, G4+ and G4X Wire-In ECUsPerfect for all custom wiring jobs utilising Link WireIn ECUs. The ‘B’ Loom has a Link ‘B’ ECU connector at one end and unterminated wires at the other. All wires are...

[PN: 101-0194] Link ECU Electronic Throttle Body Kit - 74mm (ETB74)

DETAILS: 74mm Electronic Throttle Body 74mm Bore size Dual potentiometer redundancy Bosch quality and performance Includes groove on inlet port flange Includes mating connector kit Technical Specs:See attached image. Further details on...

[PN: 101-0190] Link ECU Electronic Throttle Body Kit - 82mm (ETB82)

DETAILS: 82mm Electronic Throttle Body 82mm Bore size Dual potentiometer redundancy Bosch quality and performance Includes groove on inlet port flange Includes mating connector kit Technical Specs:See attached image. Further details on...

[PN: 101-0188] Link ECU E-Throttle Accelerator Pedal Module (PED)

DETAILS: E-Throttle Accelerator Pedal Module Firewall mounted hanging design 16degree (~70mm) travel Redundant dual output potentiometers suitable for use with Electronic throttle bodies Includes 6 pin mating connector kit Technical...

[PN: 109-9000B] Link ECU G4X XtremeX ECU + Terminated LS Engine Harness Drive-by-Wire Bundle

Harness Manual Online Instruction Manual   The quickest, easiest, tidiest and most cost effective way to connect a Link ECU to your Drive-by-Wire/E-Throttle LS V8 engine.  Bundle Includes: G4X XtremeX ECU (8 x Injector and 8 x Ignition Drives)...

[PN: 108-9000B] Link ECU G4X StormX ECU + Terminated LS Engine Harness Drive-by-Cable Bundle

Harness Manual Online Instruction Manual   DETAILS: The quickest, easiest, tidiest and most cost effective way to connect a Link ECU to your Drive-by-Cable LS V8 engine.  Bundle Includes: G4X StormX ECU (8 x Injector and 8 x...

[PN: 101-0307] Link ECU LS Gen 3 to Gen 4 Cam Sensor Conversion Harness

DETAILS: Adapter harness to run the Gen 4 front mounted under water pump Cam Sensor on the Gen 3 LS Engine.    

[PN: 101-0306] Link ECU LS Gen 4 Knock Adapter Loom

DETAILS: Intended for use with our terminated LS engine harness. Plug and play compatibility with Gen 4 Knock Sensors in factory location.       

[PN: 101-0305] Link ECU LS Gen 3 Knock Adapter Loom

DETAILS: •    Intended for use with our terminated LS engine harness. Plug and play compatibility with factory Gen 3 Knock Sensor loom (located in the valley).     

[PN: 101-0304] Link ECU LS DBW Adapter Loom

DETAILS: •    Intended for use with our terminated LS engine harness. Plug and play compatibility for Gen 4 LS DBW throttle bodies.  •    This adapter loom terminates to Aux 9/10, 5v reference,...

[PN: 101-0302] Link ESU LS Map Adapter Harness

DETAILS: •    Intended for use with our terminated LS engine harness. Plug and play compatibility for Gen 3 LS map sensors

[PN: 101-0301] Link ESU LS Stepper Adapter Harness

DETAILS: •    Intended for use with our terminated LS engine harness. Plug and play compatibility with GM LS IAC stepper motors. If you are planning to run a drive by cable configuration on our terminated LS harness you will need...

[PN: 101-0015] Link ECU Boost Control Solenoid - 3 Port (3BCS)

DETAILS: More boost? Of course and this 3 port boost control solenoid will help you do it. 3 port boost control solenoids are the go-to for the majority of boost control applications, they allow for precise control of boost and boost levels can be...

[PN: 125-1000] Link ECU CAN Lambda (CANLAM)

Download the CAN-Lambda QuickStart Guide Download the CAN-Lambda manual DETAILS: Link’s CAN Lambda is an easy to use CAN module that provides digital wideband sensor control via CAN bus and is compatible with leading aftermarket ECUs.If using the...

[PN: 100-0170] Link ECU AIM GPS09 Module for AIM Dashes

DETAILS: Add-on GPS module for the MXS and MXG Strada Dashes. 1.3m cable length.FEATURES: Sample lap and split times as well as speed, position and acceleration - all the information needed for engine tuning as well as for improving your driving...

[PN: 101-0127] Link ECU LSU 4.9 Plug Kit (PKLSU)

[PN: 101-0276] Link ECU CAN Keypad Insert - Arrow

[PN: 101-0234] Link ECU Link CAN Keypad 4 button

  DETAILS: Rugged 4 key CAN Keypad with interchangeable 15mm inserts (sold separately).Custom button inserts and configurable RGB indicator rings per button allow for extremely flexible set-ups.The keypad is designed for ultimate reliability -...

[PN: 101-0020] Link ECU Plug (CANF)

Field Installable CAN Plug - Can be used to wire in to the 6 pin CAN port on Link G4/G4+/G4X ECUs that have a round 6 pin CAN communication port. Requires soldering for assembly. Also see 101-0211, CANLTW - CAN Connection Cable for WireIn ECU’s...

[PN:101-0002] Link ECU A Loom short (0LA)

DETAILS: 0.4m long 'A' loom to suit G4, G4+ and G4X Wire-In ECUsPerfect for all custom wiring jobs utilising Link WireIn ECUs. The ‘A’ Loom has a Link ‘A’ ECU connector at one end and unterminated wires at the other. All wires are...

[PN: 115-1000] Link ECU E-throttle (RET)

Wiring Diagram (Example) DETAILS: Link's external E-throttle (Drive by Wire) module works with Link's G4X ECUs (except the entry level AtomX), plus G4+ ECUs (Storm and above) to give you full control of your throttle setup, allowing a faster more...

[PN: 101-0300] Link ECUTerminated Engine Harness GM LS GEN3/4

Manuals Online Instruction Manual   DETAILS: Terminated Engine Harness to cover a wide range of GM LS Engine Variations. Please note that due to the large number of Engines supported it may require user modification for some applications, see...

TEAM JERSEY

Check out our BMX inspired TEAM JERSEY! LIMITED quantities available for infant and youth sizes. Lightweight Competition Jersey: AirKontrol AK08 Performance Fabric V-Neck Collar, Long Raglan Sleeves, Black 2" Ribbed Cuffs 100% Polyester Machine Wash Cold...

Steel CUP, 6mm/8mm (single)

Over the years of building race cars at RAD Industries, I came up with this simple solution to assist in the custom fabrication of mounting parts on the car in a clean and professional way. This weld-on cup has been utilized for building mounting...

CUP+BUNG ALL Steel Set, 6mm/8mm (x6)

Over the years of building race cars at RAD Industries, I came up with this simple solution to assist in the custom fabrication of mounting parts on the car in a clean and professional way. This cup+bung pair is conveniently sold as a set of 6...

CUP+BUNG Set, 6mm/8mm (x6)

Over the years of building race cars at RAD Industries, I came up with this simple solution to assist in the custom fabrication of mounting parts on the car in a clean and professional way. This cup+bung pair is conveniently sold as a set of 6...