Link ECU

[PN: 101-0163] Link ECU 2.5 Bar MAP Sensor (MAP2.5)

DETAILS:   The Link 2.5 Bar MAP sensor reads up to 2.5 Bar absolute pressure. This means that it is suitable for turbo or supercharged applications running up to 1.5 Bar (approx 22psi) of...

[PN: 101-0164] Link ECU 3 Bar MAP Sensor (MAP3)

DETAILS:   This Link MAP sensor reads up to 3 Bar absolute pressure. This means that it is suitable for turbo or supercharged applications running up to 2.0 Bar (or 29psi) of boost pressure...

[PN: 101-0186] Link ECU 140 Bar Pressure Sensor (HPS)

Technical Specs:Up to 2030 PSI above atmospheric pressure, cannot be used to read vacuumSee attached image for more.    DETAILS: High Pressure sensor for Liquid. Use for Fuel,...

[PN: 101-0188] Link ECU E-Throttle Accelerator Pedal Module (PED)

DETAILS: E-Throttle Accelerator Pedal Module Firewall mounted hanging design 16degree (~70mm) travel Redundant dual output potentiometers suitable for use with Electronic throttle bodies Includes 6...

[PN: 101-0190] Link ECU Electronic Throttle Body Kit - 82mm (ETB82)

DETAILS: 82mm Electronic Throttle Body 82mm Bore size Dual potentiometer redundancy Bosch quality and performance Includes groove on inlet port flange Includes mating connector kit Technical...

[PN: 101-0193] Link ECU Adapter M10 x 1 Female to 1/8 NPT Male

DETAILS:   Stainless Steel thread adapter, M10 x 1 Female to 1/8 NPT Male, Adapts popular Bosch Metric Pressure Sensors to suit 1/8 NPT threaded ports.

[PN: 101-0194] Link ECU Electronic Throttle Body Kit - 74mm (ETB74)

DETAILS: 74mm Electronic Throttle Body 74mm Bore size Dual potentiometer redundancy Bosch quality and performance Includes groove on inlet port flange Includes mating connector kit Technical...

[PN: 101-0197] Link ECU CANJST - CAN Connection Cable for Plugin ECU's (5pin)

DETAILS: Used to add CAN communications to G4+/G4X Plugin ECU’s which have a 5 Pin CAN connector.  Plugs directly into the CAN socket on the ECU PCB. 12V and Ground via flying lead...

[PN: 101-0198] Link ECU CANJST4 - CAN Connection Cable for Plugin ECU's (4pin)

DETAILS: Required to add CAN communications & power to recently released G4X Plugin ECU’s which have the new 4 Pin powered CAN connector (not the older 5pin CAN connector).  Plugs...

[PN: 101-0199] Link ECU Adapter M10 x 1 Female to 1/8 BSP Male

DETAILS:   Stainless Steel thread adapter, M10 x 1 Female to 1/8 BSP Male, Adapts popular Bosch Metric Pressure Sensors to suit 1/8 BSP threaded ports.

[PN: 101-0210] Link ECU CANSS - CAN Connection Cable for WireIn ECU’s (ECU Header CAN)

DETAILS: Required to add CAN communication to WireIn ECU's which have CAN accessible via the Header.   Compatible ECU's:G4X/G4+ Atom (CAN1)G4X/G4+ Monsoon (CAN1)G4X/G4+ Storm (CAN2)G4X/G4+...

[PN: 101-0211] Link ECU CANLTW - CAN Connection Cable for WireIn ECU’s (6Pin CAN)

DETAILS: Required to add CAN communication to WireIn ECU's which have CAN accessible via the 6Pin round CAN connector on the front of the ECU.     Compatible ECU's:G5 Voodoo Pro...

[PN: 101-0212] Link ECU CANTEE - Link CAN Splitter Cable

DETAILS: CAN Splitter Cable for connecting an additional CAN devices. Use to connect from a CANJST, CANLTW or CANSS into 2 CAN devices.   Specs DTM4 Female to 2 x DTM4 Male. Includes CAN and...

[PN: 101-0214] Link ECU CANEXT - CAN Extension Cable 2m

DETAILS: 2 meter CAN Extension Cable for increased reach between your ECU CAN cable and CAN splitter/s or CAN device/s.   Specs DTM4 Female to DTM4 Male. Includes CAN and Power Wiring...

[PN: 101-0225] Link ECU Deutsch DTM4 Connector Kit (Female)

DETAILS:   Deutsch DTM4 Connector Kit (Female) to suit Link CAN Bus connections. Use to connect CAN devices into Link CAN bus. Includes Female Housing (Receptacle), Wedgelock & Pins ...

[PN: 101-0226] Link ECU Link CAN Gauge OLED 52mm

Click here for the CAN Gauge manual. DETAILS: The Link CAN Gauge is a compact OLED gauge for displaying real-time data from your Link ECU’s CAN stream. Supported parameters such as boost...

[PN: 101-0227] Link ECU CAN Gauge - Daisy Chain Cable

DETAILS: Use to link two or more CAN Gauges together.

[PN: 101-0229] Link ECU Loom Crimping Tool (CTSS)

DETAILS:   Crimping Tool for terminals to suit AMP Superseal connectors. To suit terminals used in A, B, C and D loom connectors.   

[PN: 101-0234] Link ECU Link CAN Keypad 4 button

  DETAILS: Rugged 4 key CAN Keypad with interchangeable 15mm inserts (sold separately).Custom button inserts and configurable RGB indicator rings per button allow for extremely flexible set-ups...

[PN: 101-0237] Link ECU Link CAN Keypad 8 button

DETAILS: Rugged 8 key CAN Keypad with interchangeable 15mm inserts (sold separately).Custom button inserts and configurable RGB indicator rings per button allow for extremely flexible set-ups.The...

[PN: 101-0239] Link ECU Link CAN Keypad 12 button

DETAILS: Rugged 12 key CAN Keypad with interchangeable 15mm inserts (sold separately).Custom button inserts and configurable RGB indicator rings per button allow for extremely flexible set-ups.The...

[PN: 101-0240] Link ECU CAN Keypad Insert - Clear

[PN: 101-0241] Link ECU CAN Keypad Insert - Black

[PN: 101-0242] Link ECU CAN Keypad Insert - Red